talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

TALK ELECTRONICS CYCLONE 1.2 INTEGRATED AMPLIFIER. This is an analog amplifier in very good condition, no scratches or visible damage. This matches well with a network player or CD player and can handle tower speakers easily as the 80W are conservatively rated. The Edwards (successor company of TE) brand support the amplifier should you need repair in future. All inputs work except AUX. SPECIFICATION Power output 20-20K 8 Ohms 80W Distortion 1KHz 10W 8Ohms <=0.01% S/N Ratio. <= -80dB A weighted <= -62dB unweighted +/- Dimensions H.W.D in mm excluding connections 93x430x300 Weight packed 8.90kg un-packed 7.50kg FRONT PANEL USING THE FRONT PANEL CONTROLS Mute: this button mutes the amplifier’s output. It does not disconnect the Cyclone from the mains supply. Push it once to silence the amplifier and push it again to restore the audio output. The blue LED above this button will illuminate when the amplifier is connected to the mains supply and switched on via the rear panel rocker switch. The red LED indicates whether the amplifier’s output is operational: if it is glowing the amplifier’s output is connected; if it is not the amplifier’s audio circuits are muted. If for any reason the blue LED is illuminated but the red LED will not come on when the mute button, or any input button, is pressed then your amplifier is in protection mode and should be returned to your dealer for examination. CD: select this button to listen to your CD player or any other source you have connected to the CD input. Tuner: select this button to listen to your tuner or any other source you have connected to the Tuner input. Aux: select this button to listen to any line level source you may have connected to it. AV: select this button to listen to your VCR, Laserdisc player or any other line level source you have connected to the AV input. See also section on Optional 6 Channel AV Buffer Tape 1: select this button to listen to your cassette deck or any other source you have connected to the Tape 1 input. Tape 2: select this button to listen to your cassette deck or any other source you have connected to the Tape 2 input. Monitor: On Cyclone 1.2 models only. You can only monitor Tape 1. When tape monitor is selected the LED above the Monitor button will glow green. To deselect the monitor function simply press the Monitor button again. Note: when switching inputs the mute light will flash momentarily as the switching software mutes the output to avoid clicks and bangs. Volume: this rotary control, not surprisingly, adjusts the amplifier’s audio output.

For sale one Edwards Audio integrated amplifier, model 1A2R which Ive had from new. The amplifier is in excellent condition, near mint and sounds terrific through my Linn Kan speakers. The only reason for sale is Ive gone for a pre and power set-up, Edwards Audio of course. The amp comes with mains lead, manual and original box and packaging.

Respectfully submitted for your perusal: This bid for one Ramsey PA-220 30W RF amplifier in terrific condition! Perfect for amplifying the 1-2W from your HT! I bought this a while ago and I’ve never used it so it’s time for it to have a new home. J What’s included: Just what you see in the pictures. The junk in the background is, of course, not included (i.e., pets, random family members, buildings). Condition: Please refer to the photographs. No damage I could see. Guaranteed to work. Check out my other items! Be sure to add me to your favorites list! Terms and conditions: If you have a feedback score of less than 10, please contact me before you bid, or I may cancel your bid. This is due to the rash of non-paying bidders. I describe things to the best of my ability. Please ask all your questions before you bid. Review my feedback and bid with confidence. Sold AS-IS. Return policy: You may return your purchase up to thirty (30) days after it has been delivered. You pay for postage both ways. Payment: Is due in my hand within 10 business days of invoice date. Must be made in US funds. Contact is due within 3 days of auction close or I get crabby. J Shipping (I combine shipping whenever possible): Local pickup is fine (COD). Your item will be shipped promptly after funds clear.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

TALK ELECTRONICS CYCLONE 2.1 INTEGRATED AMPLIFIER. Sold as spares or repair, but the unit is fully working, but has a crackle on the left channels, independent of which RCA source is used. May need recapping? Apart from that the unit is in super cosmetic condition, with no scratches or dings, but not the shaft for the volume knob is slightly out of true, so the knob moves in an arc when turned, but works fine. Probably a quick straighten with pliers would do it once you have the case off. A super amp, just needing some TLC. Ships with power cable and original manual. The Talk Electonics Cyclone 2.1 is a fully complimentary Class AB mosfet design biased towards Class A operation. The use of a bigger transformer coupled with higher-quality capacitors and improved circuit design has resulted in a conservatively-rated 100 Watts into 8 Ohms. Although it has a relatively simple industrial design, it's almost flashy when compared to the models from Creek and Naim. The faceplate has been machined into two planes, the higher separated from the lower by a line that suggests a gently rolling wave. The increase in muscularity over the Cyclone 1.1 has to be heard to be believed - loud orchestral passages and choral music is even more powerful and the additional scale and dimension given to a performance can only be described as awesome. The greater power reserve inherent in this amplifier means that more subtle and delicate music - string quartets and unaccompanied female vocals - is projected into the room with hugely impressive control and poise. Music becomes more effortless - 'hi-fi' terminology such as 'a more liquid sound' has been used in the past to describe this amplifier. The Talk Electronics Cyclone 2.1 is a truly exceptional amplifier that simply must be heard. Specifications : Inputs...............................................4 Inputs & 2 Tape Inputs Outputs............................................2 Tape Outputs & 1 Preout Output Power....................................100w/c @ 8 ohm ....................................170w/c @ 4 ohm THD..................................................0.025% 20-20KHz @ 1W Signal to noise Ratio..........................79dB ref 1W - 107dB full output Frequency response..........................10-100kHz +/- 1dB Transformer.......................................350VA Dimensions(w x d x h)........................41 x 34.5 x 16cm Weight..............................................11kg Miscellaneous : Box..................................................Yes Remote.............................................Yes Made in.............................................UK, England Condition...........................................9/10

For sale one Edwards Audio MM1 MK2 Phono Preamplifier (BRAND NEW). This phono stage is a big leap from the standard phono-stage in most amplifiers and is very well regarded.Edwards Audio equipment is all British made to a very high standard and are known for their superb design and engineering.Bought to partner my Edwards Audio Integrated Amp which is also up for sale as Ive gone for a Pre/Power setup (Edwards Audio) so it never actually got used and remained unopened. The Phono Pre-Amp is brand new. unused and still sealed, the packaging box was opened to take photos.

talk electronics amplifier and CD player cyclone 1.1 + thunder 1.1. Both CD player and amplifier worked perfectly fine unfortunately A speakers one channel is louder than the other B speakers are working perfectly fine and the CD player has a bit of fog on the display please see pictures and the amplifier does have a few marks on top please see pictures item is missing the original remote and please feel free to ask me any questions thank you

Talk Electronics Tornado 3 Power Amplifier please read description. Sold as spares and repairs it does work except it has a slight hum when on and switch is a bit lose.