Der SPL Director Vorverstärker / DA-Wandler ist ein High-End-Produkt für audiophile Enthusiasten. Dank Voltair Technik bietet er eine hervorragende Klangqualität und ist perfekt für den Einsatz an einer Endstufe oder Aktivlautsprechern geeignet. Der DA-Wandler unterstützt eine Vielzahl von Formaten und bietet somit eine hohe Kompatibilität. Das schlichte schwarze Design fügt sich nahtlos in jedes HiFi-System ein. Technisch einwandfrei, optisch nahezu neuwertig. Das Gerät kommt aus einem haustierfreiem Nichtraucherhaushalt. Das Gerät kann über jede Infrarot-FB gesteuert werden, eine Fernbedienung liegt nicht bei. Die technischen Daten finden Sie in der Bedienugsanleitung die hier heruntergeladen werden kann: https://spl.audio/wp-content/uploads/Director_BA_DE.pdf Versand nur innerhalb Deutschlands, Versand innerhalb der EU nach vorheriger Absprache möglich. Dies ist ein Privatverkauf, ich biete keine Garantie / Gewährleistung, keine Rücknahme. Fragen werden gerne beantwortet. Die OVP ist vorhanden, die original Rechnung, ein Standart Netzkabel und ein Klinken-Kabel für den 12V Triggeranschluss lege ich bei.

I Was very excited to get this unit originally ..but simply put I found out shortly after my Original Director 1 fit my newly aquired Stereo Rack better ... Original retail price $3599.00 / Analog Stereo Inputs 6 analog stereo inputs 2 x XLR, balanced (10 kOhm) 4 x RCA, unbalanced (47 kOhm) Max. input level: +32,5 dBu Digital Inputs 4 digital inputs AES/EBU (XLR), balanced Coaxial SPDIF (RCA) Optical TOSLINK (F06) USB (B) 0 dBFS = 15 dBu Converter Chip AK4490-Velvet Sound Sample Rates 32 Bit Encoded PCM (kHz): 44.1, 48 , 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768 DSD: DSD1 (DSD64), DSD2 (DSD128), DSD4 (DSD256) Outputs 2 analog stereo outputs Neutrik XLR, balanced, Pin 2 = (+) RCA, unbalanced (Direct Out) Impedance: 75 ohms (balanced) max. output level 32,5 dBu Measurements Frequency range (analog): 10 Hz (-0.1 dB), 200 kHz (-1.2 dB) Crosstalk at 1 kHz: -108 dB (analog); -108 dB (digital) THD: 0.00992 % (analog 0 dBu); 0.0014 % (digital -1 dBfs) Noise (A-weighted): -102.5 dB (analog); -100.2 dB (digital) Dynamic range: 135 dB (analog); 115.2 dB (digital) Internal Voltages Analog: +/- 60 V Digital: + 7 V and + 3.3 V Power Supply Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz Fuses: 230 V: T 500 mA; 115 V: T 1 A Power consumption: max. 40 VA Standby power consumption: 0.7 W Dimensions (incl. feet) 278 mm W x 100 mm H x 330 mm D 10.95 in W x 3.94 in H x 13 in D Weight 4.55 kg; 10.03 lbs (unit only) 5.7 kg; 12.57 lbs (shipping) 0 dBu = 0.775 V. Subject to change without notice. Milled from solid The massive 45mm volume control knob milled from aluminum is a haptic highlight. Its mass together with the motorized Alps RK27 Big Blue potentiometer enhances the spoon in the honey feeling even further. The red marker LED ensures good visibility of the volume parameter even in darkened environments. Remote control The volume control can be remotely controlled with any infrared remote control. The Director Mk2 learns to communicate with it with the simple push of a button. Source of joy Up to ten (10!) stereo sources can be connected to the Director Mk2. Six of them are for analog and four for digital input signals.The source selection is shown in the dot matrix LED display: IN 1 through IN 6 for the analog inputs. AES, USB, COAX, OPTIC for the digital inputs, where the detected sample rate is displayed after about two seconds. For example U768 = USB input with 768 kHz sampling rate. The source selection can also be operated remotely if the rotary switch is set to the Remote position. The Director Mk2 offers two pairs of balanced inputs with XLR connectors and four standard inputs with gold-plated RCA connectors. On the digital side there are four additional inputs. PCM audio is received in S/P-DIF format via coaxial Cinch, optical Toslink and balanced XLR (AES). Both PCM audio and DSD audio can be converted via USB. Well informed The DAC automatically picks up the sampling rate and resolution of the digital playback source. No matter if a streamer, computer or CD player is connected. No further settings on the Director Mk2 are necessary. The detected sampling rate is shown in the dot matrix LED display. For example, U768 is an acronym for the source USB with a sampling rate of 768 kHz. The highly acclaimed AKM AK4490 Velvet Sound premium DAC chip is used as the converter chip in the digital-to-analogue converter, which thanks to its architecture reproduces the finest sound details. It converts PCM audio with a resolution of 32 bits and a sampling rate of up to 768 kHz, which is equivalent to 16 times CD resolution. Direct Stream Digital is also supported up to a resolution of DSD4 or DSD256. In contrast to the DAC 768xs, the DAC768 not only offers an AES/EBU digital input, but also the SPL DLP120 with VOLTAiR technology. The analog output of the DAC chip must be filtered by a low pass filter. Phonitor xe has two of them: One for PCM audio and one for DSD audio, since different roll-off frequencies are required. In contrast to all other DACs in the world, the low pass filters here are built using VOLTAiR technology, which provides a plus in dynamics and headroom and sound.

I am selling a six month old SPL Director MK2 Preamp Dac. The preamp has mint cosmetics and everything functions as it should. It will ship in the factory box with all accessories. The unit will ship for free. SPL Director Mk2 Preamplifier/DACThe DAC768 uses AKM’s AK4490 premium chip (32-bit resolution with up to 768kHz sample rate).Low pass filters for both PCM and DSD use VOLTAiR Technology for greater dynamics.Almost any remote you own can be programmed to control the Director Mk2.Through the USB input, DSD up to DSD4 (DSD256) is supported.