Estate find - the six track deck plays - head phones work outputs work faders work effects work - don’t know about b deck - selling as is because of this - thx

SANSUI 7070 STEREO RECEIVER 4-PIECES EOM FEET WITH SCREWS LOT as pictured, it pulled, in good condition. Note: This selling is final (no return or refund) Please buy or bid accordingly. Thanks for looking.

This vintage Sansui turntable headshell with SC-50 cartridge is a great addition to your collection. The headshell is compatible with Sansui brand and can fit Sansui turntables. The multicolor cartridge delivers high-quality sound and is manufactured in Japan. Please note that the headshell does not include screws and may have some roughness due to previous use. However, this does not affect the performance of the item. Add this unique piece to your audio setup and enjoy the high-fidelity sounds it has to offer.

In great vintage condition.

Sansui WS-X1 6-TRK MULTISPUR RECORDER MIT 8-KANAL STEREO MIXER. mit Bedienungsanleitung Hinweis: Das Teil wurde einige Monate lang nicht mehr verwendet. Ich kann daher nicht garantieren, dass es absolut 100% funktionsfähig ist. Fragen sind willkommen.Ich bin Privatverkäufer und verkaufe diesen Artikel wegen des neuen Haftungsrechts UNTER AUSSCHLUSS JEGLICHER GEWÄHRLEISTUNG.

As shown. Please read through some of my thousands of reviews for Vintage Stereo Sales and buy with confidence from an experienced seller of Vintage Audio and Vintage Audio Parts.

This unit was DOA. During disassembly bagged all hardware I did not need for parts orders. So, this is 90+ percent of what you need to replace lost screws and such. No returns on electronic parts. So, please be sure this fits your Sansui before you pay. Another offer from, Gary….sansuioldaudiophile

The stand is in good working condition, it has some scratching due to normal usage, the screws are included.

***** PLEASE READ ***** IN ORDER TO SPEED UP RETURNS PLEASE READ BELOW In the case of ANY return no matter what the reason, we need ALL buyers to open returns as Changed Mind and then just list the issue in the comments. We offer free returns so you will still get a return label paid for by us and if this is done it wont affect our return metrics. This will help sellers and buyers out greatly !!ALSO...For any item being sold AS IS for parts or repair, we DO NOT accept returns. They are being sold for parts and all buyers need to understand if youre purchasing an item for parts, that is an AS IS sale. Although we do have the listings set to free returns, if a return is opened we will pay the return shipping. But there will be a 50% return fee for all of those items.Thanks :-) ====================DESCRIPTION This item is used but in great working condition! TV Make & Model: Sansui SLED2453W Additional Info: XXXX ?????????? TV Stand Sansui SLED2453W Genuine Pedestal Base Mount w Screws ==================== Make sure to read the condition description,item specifics, and check out the pictures for all details about this item. ONLY WHATS SHOWN IN THE PICTURES IS WHATS INCLUDED IN THE LISTING. The cosmetic condition of the item(s) is shown to the best of our ability in the pictures we post. Please review all photos carefully for wear on used / pre-owned / broken items before purchasing. We normally take many photos to help guide you in your decision. Powered by SixBits eCommerce Solution

Sansui SR 222 MKII Spindle,Bearing Screws. Used condition,working fine. Only UK post.

SANSUI 9090DB STEREO RECEIVER 4 PIECES ORIGINAL PLASTIC FEET & SCREWS as pictured. Theyre pulled in good condition as shown, these feet lot also compatible with Sansui 9090 8080db 8080 980 980db 990 990db. This selling is final (no return or refund) Please buy or bib accordingly. Thanks for looking.

Sansui Turntable Tonearm Cartridge Mounting Screws (Ultra Light Weight Nylon) The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x4 mm Nylon 66 Screws.2 x M2.5x6 mm Nylon 66 Screws.2 x M2.5x8 mm Nylon 66 Screws.2 x M2.5x10 mm Nylon 66 Screws.2 x M2.5x12 mm Nylon 66 Screws.2 x M2.5x15 mm Nylon 66 Screws.2 x M2.5x18 mm Nylon 66 Screws.2 x M2.5x20 mm Nylon 66 Screws.16 x M2.5 Nylon 66 Fixing Nuts.16 x Nylon Washers.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models) Goldring (All Modes) Dual (All Models) Denon (All Models) Hitachi (All Models) Trio (All Models) Kenwood (All Models) Acoustic Research (All Models) A&R (All Models) + Many Other Makes.These are by far the Best Choice for use with MC Moving Coil Cartridges.They can be used with almost all MM Moving Magnet Cartridges as well.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

SANSUI 7070 STEREO RECEIVER 4-PIECES EOM FEET WITH SCREWS LOT as pictured, it pulled, in good condition. Note: This selling is final (no return or refund) Please buy or bid accordingly. Thanks for looking.

You are bidding on eight brand new (New Old Stock) American made 3/4” high feet that are also a perfect fit for many brands such as Marantz, McIntosh, Sansui, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. These are the perfect size replacement feet for Marantz separate components and receivers (and many other brands), but are much better quality! A box of these 3/4 high American made feet was found at an old high-end Audio Service Center that went out of business. They are the exact same material and brand of feet that McIntosh audio equipment has used for over 50 years, but these are not the exact same height as the McIntosh feet (which were either 5/8” high or 1” high). These 3/4” high black feet are in like new condition and will include the three most common size screws that will fit Marantz, McIntosh, most Sansui items, and many of the other vintage audio brands. (a total of 24 screws will be included, 8 Metric thread, 8 American thread, and 8 Machine thread). These will be the correct length screws for these feet. The feet measure 3/4” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.

Here is a vintage set of 4 original Sansui 9090DB feet w/ screws c. 1976. Set is complete and in great vintage condition with some signs of use. Please ask all questions before purchase. Thanks for looking!

SANSUI 9090DB STEREO RECEIVER 4 PIECES ORIGINAL PLASTIC FEET & SCREWS as pictured. Theyre pulled in good condition as shown. Note: This feet lot also compatible with Sansui 9090 8080db 8080 980 980db 990 990db. This selling is final (no return or refund) Please buy or bib accordingly. Thanks for looking.

You are bidding on eight brand new (New Old Stock) American made 3/4” high feet that are also a perfect fit for many brands such as Marantz, McIntosh, Sansui, Fisher, Crown, Heathkit, Dynaco, Harman Kardon, Scott, Lafayette, Sherwood, Kenwood, Sony, Technics, Pioneer and many more. These are the perfect size replacement feet for Marantz separate components and receivers (and many other brands), but are much better quality! A box of these 3/4 high American made feet was found at an old high-end Audio Service Center that went out of business. They are the exact same material and brand of feet that McIntosh audio equipment has used for over 50 years, but these are not the exact same height as the McIntosh feet (which were either 5/8” high or 1” high). These 3/4” high black feet are in like new condition and will include the three most common size screws that will fit Marantz, McIntosh, most Sansui items, and many of the other vintage audio brands. (a total of 24 screws will be included, 8 Metric thread, 8 American thread, and 8 Machine thread). These will be the correct length screws for these feet. The feet measure 3/4” high by 7/8” across the top by 1 1/8” across the bottom. These are the exact same original high quality polyethylene feet, by the same American manufacturer that many of the high-end companies from the 1960’s, 1970’s, and 1980s used. These feet were made to be almost indestructible! They will work well with almost any brand of audio equipment, and are much better quality than original plastic feet that tend to crack if over tightened. They will not dry out and eventually flatten, like rubber feet have a tendency to do. These American made feet are the best quality audio feet I have ever come across, and were manufactured to last a lifetime! Shipping and handling will be $5.00 anywhere in the U.S.A. Thank you.