In great shape and working well.Lots of inputs.Does Pro Logic and hall and stadium surround modes.Two flaws there is a scratch on the top part of the cabinet and I have the remote but it doesnt work on the unit. I think the remote works because it lights up.It might be the remote sensor on the unit is bad. This is a killer amp,check out the specs.This is for sale locally for my friend Graig so I may end this auction early if I get an offer and there are no bids.No returns unless damaged in shipping. You have 3 days for notify me for a refund.Local pickup is fine and you can pay with cash. The “75-watt” rating of the Denon AV C-2000’s main outputs proved to be very conservative. At 1,000 Hz, the front outputs clipped at 114.3 watts into 8 ohms and at 178.5 watts into 4 ohms. Since the amplifier is rated only for 8-ohm service, we did not attempt continuous operation into 2 ohms. We did make dynamic power tests at all three impedance levels, measuring 121 watts into 8 ohms, 176 watts into 4 ohms, and an impressive 225 watts into 2 ohms. The THD plus noise, when the amplifier was driving 8 ohms at 75 watts, was 0.0085 to 0.01 percent from 20 to 8,000 Hz, reaching 0.015 percent at 20,000 Hz. Readings were slightly higher at lower power outputs because of the greater contribution of noise, reaching a maximum of 0.02 percent at 7.5 watts. At a constant 0.1-percent distortion, the amplifier delivered 65 watts into 8 ohms at 20 Hz, 90 watts from 1,000 to 10,000 Hz, and 75 watts at 20,000 Hz. With 4-ohm loads, the maximum output at 0.1-percent distortion was 100 watts at 20 Hz, 118 watts at 20,000 Hz, and 140 watts between 2,000 and 6,000 Hz. The frequency response through a high-level input was +0, —1 dB from 20 to 20,000 Hz, and the RIAA phono-equalization error was less than 0.1 dB from 200 to 20,000 Hz and — 1.2 dB at 20 Hz. The sensitivity, for a 1-watt reference output, was 18.5 millivolts (mv) through a high-level input and 0.35 mv through the phono input, with respective A-weighted noise levels of — 83.2 dB and —75.5 dB. The phono preamplifier overloaded at 170 mv input at 20 and 1,000 Hz and 157 mv at 20,000 Hz. The phono-input impedance was 47,000 ohms in parallel with 160 picofarads.

Great condition. One scuff in the front right corner as shown in picture. One day handling. Fast shipping.

Hello, we will try our best to describe our items to the best of our ability, if you receive my item and its not as described please contact us before leaving any negative or neutral feedback I have for sale: Genuine OEM Denon UTU-200 CD Precision Audio Component/AM-FM Stereo Tuner Free Fast Shipping FREE FAST SHIPPING... Condition of the item: Used...Item works good, please look at the original photos... Includes: everything that is on pictures... We will try our best to describe our items to the best of our ability, if you receive my item and its not as described please contact us before leaving any negative or neutral feedback, Thank you Very much.

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.

Great condition. One scuff in the front right corner as shown in picture. One day handling. Fast shipping.

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.

In great shape and working well.Lots of inputs.Does Pro Logic and hall and stadium surround modes.Two flaws there is a scratch on the top part of the cabinet and I have the remote but it doesnt work on the unit. I think the remote works because it lights up.It might be the remote sensor on the unit is bad. This is a killer amp,check out the specs.This is for sale locally for my friend Graig so I may end this auction early if I get an offer and there are no bids.No returns unless damaged in shipping. You have 3 days for notify me for a refund.Local pickup is fine and you can pay with cash. The “75-watt” rating of the Denon AV C-2000’s main outputs proved to be very conservative. At 1,000 Hz, the front outputs clipped at 114.3 watts into 8 ohms and at 178.5 watts into 4 ohms. Since the amplifier is rated only for 8-ohm service, we did not attempt continuous operation into 2 ohms. We did make dynamic power tests at all three impedance levels, measuring 121 watts into 8 ohms, 176 watts into 4 ohms, and an impressive 225 watts into 2 ohms. The THD plus noise, when the amplifier was driving 8 ohms at 75 watts, was 0.0085 to 0.01 percent from 20 to 8,000 Hz, reaching 0.015 percent at 20,000 Hz. Readings were slightly higher at lower power outputs because of the greater contribution of noise, reaching a maximum of 0.02 percent at 7.5 watts. At a constant 0.1-percent distortion, the amplifier delivered 65 watts into 8 ohms at 20 Hz, 90 watts from 1,000 to 10,000 Hz, and 75 watts at 20,000 Hz. With 4-ohm loads, the maximum output at 0.1-percent distortion was 100 watts at 20 Hz, 118 watts at 20,000 Hz, and 140 watts between 2,000 and 6,000 Hz. The frequency response through a high-level input was +0, —1 dB from 20 to 20,000 Hz, and the RIAA phono-equalization error was less than 0.1 dB from 200 to 20,000 Hz and — 1.2 dB at 20 Hz. The sensitivity, for a 1-watt reference output, was 18.5 millivolts (mv) through a high-level input and 0.35 mv through the phono input, with respective A-weighted noise levels of — 83.2 dB and —75.5 dB. The phono preamplifier overloaded at 170 mv input at 20 and 1,000 Hz and 157 mv at 20,000 Hz. The phono-input impedance was 47,000 ohms in parallel with 160 picofarads.

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.

In great shape and working well.Lots of inputs.Does Pro Logic and hall and stadium surround modes.Two flaws there is a scratch on the top part of the cabinet and I have the remote but it doesnt work on the unit. I think the remote works because it lights up.It might be the remote sensor on the unit is bad. This is a killer amp,check out the specs.This is for sale locally for my friend Graig so I may end this auction early if I get an offer and there are no bids.No returns unless damaged in shipping. You have 3 days for notify me for a refund.Local pickup is fine and you can pay with cash. The “75-watt” rating of the Denon AV C-2000’s main outputs proved to be very conservative. At 1,000 Hz, the front outputs clipped at 114.3 watts into 8 ohms and at 178.5 watts into 4 ohms. Since the amplifier is rated only for 8-ohm service, we did not attempt continuous operation into 2 ohms. We did make dynamic power tests at all three impedance levels, measuring 121 watts into 8 ohms, 176 watts into 4 ohms, and an impressive 225 watts into 2 ohms. The THD plus noise, when the amplifier was driving 8 ohms at 75 watts, was 0.0085 to 0.01 percent from 20 to 8,000 Hz, reaching 0.015 percent at 20,000 Hz. Readings were slightly higher at lower power outputs because of the greater contribution of noise, reaching a maximum of 0.02 percent at 7.5 watts. At a constant 0.1-percent distortion, the amplifier delivered 65 watts into 8 ohms at 20 Hz, 90 watts from 1,000 to 10,000 Hz, and 75 watts at 20,000 Hz. With 4-ohm loads, the maximum output at 0.1-percent distortion was 100 watts at 20 Hz, 118 watts at 20,000 Hz, and 140 watts between 2,000 and 6,000 Hz. The frequency response through a high-level input was +0, —1 dB from 20 to 20,000 Hz, and the RIAA phono-equalization error was less than 0.1 dB from 200 to 20,000 Hz and — 1.2 dB at 20 Hz. The sensitivity, for a 1-watt reference output, was 18.5 millivolts (mv) through a high-level input and 0.35 mv through the phono input, with respective A-weighted noise levels of — 83.2 dB and —75.5 dB. The phono preamplifier overloaded at 170 mv input at 20 and 1,000 Hz and 157 mv at 20,000 Hz. The phono-input impedance was 47,000 ohms in parallel with 160 picofarads.

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.

Hello, we will try our best to describe our items to the best of our ability, if you receive my item and its not as described please contact us before leaving any negative or neutral feedback I have for sale: Genuine OEM Denon UTU-200 CD Precision Audio Component/AM-FM Stereo Tuner Free Fast Shipping FREE FAST SHIPPING... Condition of the item: Used...Item works good, please look at the original photos... Includes: everything that is on pictures... We will try our best to describe our items to the best of our ability, if you receive my item and its not as described please contact us before leaving any negative or neutral feedback, Thank you Very much.

In great shape and working well.Lots of inputs.Does Pro Logic and hall and stadium surround modes.Two flaws there is a scratch on the top part of the cabinet and I have the remote but it doesnt work on the unit. I think the remote works because it lights up.It might be the remote sensor on the unit is bad. This is a killer amp,check out the specs.This is for sale locally for my friend Graig so I may end this auction early if I get an offer and there are no bids.No returns unless damaged in shipping. You have 3 days for notify me for a refund.Local pickup is fine and you can pay with cash. The “75-watt” rating of the Denon AV C-2000’s main outputs proved to be very conservative. At 1,000 Hz, the front outputs clipped at 114.3 watts into 8 ohms and at 178.5 watts into 4 ohms. Since the amplifier is rated only for 8-ohm service, we did not attempt continuous operation into 2 ohms. We did make dynamic power tests at all three impedance levels, measuring 121 watts into 8 ohms, 176 watts into 4 ohms, and an impressive 225 watts into 2 ohms. The THD plus noise, when the amplifier was driving 8 ohms at 75 watts, was 0.0085 to 0.01 percent from 20 to 8,000 Hz, reaching 0.015 percent at 20,000 Hz. Readings were slightly higher at lower power outputs because of the greater contribution of noise, reaching a maximum of 0.02 percent at 7.5 watts. At a constant 0.1-percent distortion, the amplifier delivered 65 watts into 8 ohms at 20 Hz, 90 watts from 1,000 to 10,000 Hz, and 75 watts at 20,000 Hz. With 4-ohm loads, the maximum output at 0.1-percent distortion was 100 watts at 20 Hz, 118 watts at 20,000 Hz, and 140 watts between 2,000 and 6,000 Hz. The frequency response through a high-level input was +0, —1 dB from 20 to 20,000 Hz, and the RIAA phono-equalization error was less than 0.1 dB from 200 to 20,000 Hz and — 1.2 dB at 20 Hz. The sensitivity, for a 1-watt reference output, was 18.5 millivolts (mv) through a high-level input and 0.35 mv through the phono input, with respective A-weighted noise levels of — 83.2 dB and —75.5 dB. The phono preamplifier overloaded at 170 mv input at 20 and 1,000 Hz and 157 mv at 20,000 Hz. The phono-input impedance was 47,000 ohms in parallel with 160 picofarads.

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.

Denon POA-2200 Precision Stereo Power Amplifier. A stereo power amplifier with dual super no-feedback amplifier.DENONs original dual super non-feedback amplifier is used for the circuit method, and the essence of amplifier technology such as complete DC configuration and non-switching method is put into it.The dual super no-feedback circuit is designed to eliminate static distortion and inherent noise caused by nonlinear characteristics of amplification elements such as power transistors.The structure consists of three servo amplifiers : a distortion servo circuit in which the N-channel and P-channel transistors in the power stage cancel each others distortion, and a distortion servo circuit in which the total distortion appearing in the output stage of the speaker is eliminated. The main signal is transmitted to the speaker terminal without feedback, and because there is no NFB circuit, it is not affected by the back electromotive force from the speaker, and there is no increase in distortion when the speaker is connected.F for pre-driver stageTIt uses a 150 MHz high-speed transistor and a direct DC servo circuit with a fully capacitorless signal path (fully DC configuration) for higher slew rate.The output stage adopts a 4-parallel push-pull configuration using a high-capacity high-speed power transistor of Pc130W.In addition, DENONs original bias circuit is used to eliminate switching distortion and reduce crossover distortion.The voltage amplification stage employs circuits and devices designed for high speed and wide dynamic range. In addition to three stage differential amplification using low-noise and low-feedback capacitance FET at the first stage, a Pc25W large-capacity transistor is installed at the final stage.In addition, the Unity Current Interface (UCI) circuit is adopted to emphasize the interface characteristics of the amplifier stage and power stage. This circuit is a system in which the load of the voltage amplifier stage is always constant regardless of the operation of the power stage. By driving the power stage only with voltage, higher speed and lower distortion are realized.The power supply employs a unique pure dynamic power supply system to effectively reduce dynamic IM distortion (intermodulation distortion) caused by interference between input signal and ripple current generated in the power supply.It is also equipped with a 800 VA class large toroidal transformer and 8 10,000 ? F large-capacity block capacitors, and combined with a high-output power transistor to realize a drive that does not fluctuate even when the speaker impedance drops to 2 ? instantaneously. In addition, the secondary winding and subsequent parts of the power transformer are made into a complete monaural configuration. After the left and right parts are taken out separately, they pass through independent large-capacity smoothing circuits and rectifier circuits, and are supplied to the predriver stage and power stage. This improves static and dynamic crosstalk characteristics.The internal layout is twin monaural construction. The left and right channels are perfectly symmetrical with the power transformer at the center. The pre-driver / power stage, block capacitors, rectifier circuit, volume and input / output terminals are symmetrically laid out.This eliminates the mutual interference between the small-signal line and the large-current line and between the left and right channels, as well as the non-uniform characteristics.Equipped with two input terminals.In normal mode, it is input to the voltage amplifier stage via the volume. In direct mode, it jumps to the volume and is directly connected.A bar line multi-display is adopted in the center of the front panel. When the power is turned on, it blinks for a few seconds until normal operation is achieved and then falls. In addition, when an error occurs in the set, one of the four divided bars blinks to indicate the abnormal operation of overload detection, L/R DC detection and temperature detection circuit.In addition, the newly developed overload protector is built-in, and abnormality is instantly detected.Uses a speaker terminal that can be connected up to 6 mm core diameter.SpecificationsPower output: 220 watts per channel into 8? (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.002%Input sensitivity: 1VSignal to noise ratio: 123dBSpeaker load impedance: 6? (minimum) FREE SHIPPING ONLY TO CONTINENTAL US

Denon AVR-1200 Receiver AM/FM AV Surround Stereo Precision Dolby So many options, we used speakers and dvd player with it, but Im sure there is so much more. No remote or book - but you can get these if you need them on ebay. long speaker wire included and some connection cables.