I have had this for a couple of years and only used it as a stereo preamp. I just upgraded to an Anthem TLP-1 which is a lot smaller (2 channels only) and fits better in my system. So I am selling this one. The sound of the Anthem is pretty much the same as from this Outlaw (very good) but it is easier to use. I sounds very good in stereo, but I only used the FM, CD, DVD and AUX inputs. I never used any of the zone, video or digital connections. (I have a very good Oppo blu-ray deck so I always use the Oppo DAC.) It will be packed well and shipped free. Any reasonable offer is welcome. I added local shipping and if you choose to pick this up, I will be inclined to accept a lower price. I got this from the Outlaw website:Specifications:Audio Section Analog• Frequency response: 10 Hz - 90 kHz: +0, -3 dB (Bypass Mode) • Signal to Noise Ratio: 102 dB (Bypass Mode) • Distortion: 0.0038% (20 Hz ~ 20 kHz) (Bypass Mode) • Input sensitivity / input impedance: 200 mV/ 47kohms • Rated output: 1V(0dB gain in Bypass Mode) Digital• Signal to Noise Ratio: 102 dB • Total Harmonic Distortion: <0.005% (1 kHz, at 0 dB) • Dynamic Range: 100 dB • D/A Output: Rated output 2 V (At 0 dB playback) • Digital Input: S/P-DIF Format • DSP Processor: Cirrus® CS 49326 • ADC: Cirrus CS 5360 • DAC: Cirrus CS 4396Video Section Composite• Video Format: NTSC • Input/Output Level: 1 volt P-P • Input/Output Impedance: 75W • Frequency Response: 5 Hz - 10 MHz -- +0, -3 dB S-Video • Signal Format: NTSC Y/C • Luminance (Y) Input/Output Level: 1 volt P-P • Chrominance © Input/Output Level: 0.3 volt P-P • Input/Output Impedance: 75W • Frequency Response: 5 Hz - 10 MHz -- +0, -3 dB Component Video• Signal Format: NTSC Y/Pr/Pb • Analog Components • Luminance (Y) Input/Output Level: 1 volt P-P • Pr Input/Output Level: 0.7 volt P-P • Pb Input/Output Level: 0.7 volt P-P • Input/Output Impedance: 75W • Frequency Response: DC - 45 MHz -- +0, -3 dBTuner Section FM• FM Tuning Range: 87.5 MHz - 108 MHz AM• Usable Sensitivity: Stereo: 1.8µV • 50 dB Quieting Sensitivity: MONO 2.5µV STEREO 23 µV • Signal to Noise Ratio (IHF-A): MONO 79 dB STEREO: 74dB • Total Harmonic Distortion: MONO 0.2% STEREO: 50 dB • AM Tuning Range: 520 kHz - 1710 kHz • Usable Sensitivity: 25µVGeneral• Power supply: AC 120 V, 60 Hz • Power consumption: 45W • Dimensions (including feet and connectors): 17.12 (W) x 4.6 (H) x 14.76 (D) inches, 435 (W) x 117 (H) x 375 (D) mm • Weight: 17.6 Lbs/8 kg • Trigger Outputs (x2): 12 VDC, 100 mA maximum

Up for sale is a working condition, preamp/processor by Outlaw, Model 990.Comes with remote and manual. All functions work as should. It has too manyfeatures to list. Look at all the pictures for connections.The serial number A06.11204A0246.I used this unit as a two channel unit. I liked that it has a Phono input. Sale to lower 48. Please look at all the pictures for an overall condition before bidding.ALL PICTURES ARE PART OF DESCRIPTION, SO TAKE A CLOSE LOOK. SHIPMENTWe usually ship within 3 to 5 working days from payment. All payments are due at the end of sale. If we have not received paymentwithin 3 days from sale, we will notify E-bay for NONE-PAYMENT and we will re-list the item.

Very good condition multi-channel amplifier. See photos of actual item. https://hometheaterhifi.com/volume_9_4/outlaw-audio-770-power-amplifier-11-2002.html Original box. Will ship to 48 states only - 5 business days handling time Also local pick up in central Florida area - Daytona-Orlando-Tampa Specifications:? Power output: 200 watts RMS x 7 (all channels driven simultaneously into 8 ohms from 20 Hz to 20 kHz with less than 0.05% total harmonic distortion). 300 watts RMS x 7 @ 4 ohms? S/N: 119 dB? Power Bandwidth:5 Hz - over 100 kHz (+0/-3 dB)? Damping factor: 850 (10 Hz - 400 Hz)? Input sensitivity/Impedance: 1.43 volts for full output/28 k ohms? Crosstalk: Greater than -90 dB from 20 Hz to 20 KHz? Gain: Voltage gain of 28 dB? Slew rate: 50 Volts/microsecond? Remote Trigger voltage: 3 - 32 volts DC? Power requirements: 115 V 50-60 Hz? Power consumption: 1,800 watts (maximum)? Dimensions 7 3/4 H x 17 1/4 W x 18 D? Weight: 90 Pounds? MSRP $1,799 USA

Looking for a high-performance power amplifier to enhance your home audio system? Look no further than the Outlaw Audio Model 5000x. This 5-channel amplifier boasts multiple audio inputs, including multi-channel RCA and XLR, as well as speaker binding posts for audio outputs.Not only does the Outlaw Audio Model 5000x deliver exceptional sound quality, but it also comes with a manufacturer warranty of 5 years. Please note that some Outlaw products may contain materials or components that may expose you to chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or other reproductive harm. Invest in the Outlaw Audio Model 5000x for a top-of-the-line amplifier that will elevate your home audio experience.On Dec-19-23 at 07:27:19 PST, seller added the following information: ***SORRY, THIS IS NOT A 5000X. IT HAS RCA INPUTS, NOT XLR.

Upgrade your home theater system with the Outlaw Audio Model 975 7.1 HDMI AV Surround Processor. This sleek black preamp processor features digital coaxial RCA, sub pre out/LFE, digital optical TOSLINK, HDMI, and pre out audio inputs, as well as RCA audio outputs and support for FM and AM modes. With 7 channels and 5 inputs, this home theater processor is perfect for delivering immersive surround sound with DTS, DTS 5.1, Dolby Pro Logic II, and Dolby Digital formats. Please note that some Outlaw products may contain materials or components that may expose you to chemicals including DEHP. For more information, please visit www.P65Warnings.ca.gov. Get ready for an unparalleled home entertainment experience with the Outlaw Audio Model 975 7.1 HDMI AV Surround Processor.

Outlaw 7000x 7 channel amplifier in mint condition. Warranty to 9/25. Factory double box and all accessories included.

Very good condition multi-channel amplifier. See photos of actual item. https://hometheaterhifi.com/volume_9_4/outlaw-audio-770-power-amplifier-11-2002.html Original box. Will ship to 48 states only - 5 business days handling time Also local pick up in central Florida area - Daytona-Orlando-Tampa Specifications:? Power output: 200 watts RMS x 7 (all channels driven simultaneously into 8 ohms from 20 Hz to 20 kHz with less than 0.05% total harmonic distortion). 300 watts RMS x 7 @ 4 ohms? S/N: 119 dB? Power Bandwidth:5 Hz - over 100 kHz (+0/-3 dB)? Damping factor: 850 (10 Hz - 400 Hz)? Input sensitivity/Impedance: 1.43 volts for full output/28 k ohms? Crosstalk: Greater than -90 dB from 20 Hz to 20 KHz? Gain: Voltage gain of 28 dB? Slew rate: 50 Volts/microsecond? Remote Trigger voltage: 3 - 32 volts DC? Power requirements: 115 V 50-60 Hz? Power consumption: 1,800 watts (maximum)? Dimensions 7 3/4 H x 17 1/4 W x 18 D? Weight: 90 Pounds? MSRP $1,799 USA

I have one (1) Outlaw Audio ICBM for sale. Works as advertised and is in excellent condition. Connected it inline with a 2-channel system yesterday to make sure that it still works as advertised - it does but there is a background hum that I dont remember from when I had it installed into a multi-channel system. My guess is that the issue is the cheap power supply and a quality linear power supply should clean that up. What is the Outlaw Audio ICBM? ...the ICBM will put all the bass in the right place. If you have small satellite speakers and a subwoofer, it will keep the bass out of the small speakers and send it all to the subwoofer. If you have large tower speakers and no subwoofer, the ICBM will route the .1 bass from the subwoofer track over to the tower speakers. The ICBM-1 is a precision, audiophile grade bass management device developed primarily for use with multi-channel DVD-Audio and SACD players. In order to preserve the quality of the analog signal, the ICBM employs state of the art, low-noise, dual op-amps, metal-film resistors and film capacitors. To enable you to precisely match the crossover points of your specific speaker complement, the ICBM allows you separate crossover points for the front left/right, center, and right surround, left surround and subwoofer channels. These crossover choices are 40 Hz, 60 Hz, 80 Hz, 100 Hz and 120 Hz. In addition to performing this mandatory function for DVD-Audio or SACD, the ICBM may also substitute for a pre-amps own bass management circuitry. Bass management is the process of redirecting bass signals to the appropriate place in your system. Whether you have small satellite, bookshelf, or tower speakers your system is not running to its full potential without proper bass management. Small bookshelves and satellite speakers are not designed to play back low bass signals. Redirection of this low frequency energy to a dedicated subwoofer will not only prevent your speakers from being damaged but also allows the signal to be reproduced. Many bookshelf speakers begin to stop producing output between 60 and 100 Hz. Without bass management, signals below these frequencies are lost. Many enthusiasts with tower speakers run them full bandwidth. While this is certainly safe in most cases, it is not ideal. Most tower speakers are incapable of reproducing a flat frequency response down to 20 cycles, and often times begin to roll off around 40 Hz. In addition to the loss of low bass information, your speakers (and amplifier) are being asked to run at full steam. Freeing up your speakers from these lowest bass signals enables them to reproduce higher frequencies with greater accuracy, and depth, improving overall sound quality and user enjoyment. The ICBM-1 sets a new standard for bass management flexibility far exceeding the capabilities of todays most advanced pre-amp processors. The ICBM-1 offers separate, user selectable crossover points, sub level control, independent LFE trim control, adjustable slope control, and bass recombine all while remaining acoustically transparent. If that werent enough, the ICBM is the only bass management device we are aware of that may optionally be configured to drive stereo subwoofers with hard left and hard right derived bass signals. This is accomplished by summing the bass from the left, left surround and half of the center channel bass signals for the left subwoofer, and the right, right surround and the other half of the center channel bass signals for the right subwoofer.

Outlaw 976 7.1 Surround Processor / PreampTEST RESULTSPower Tested, Fan Works, Buttons Respond.Pulled from a Professional Environment.Functionality/Cosmetic DescriptionSee Categories BelowF1,C4ACCESSORIES / PARTSPower supply or cable(s) are NOT included. If we include any, it is to be nice. Fitment of plug not covered under eBay guarantee.WarrantyWe do offer a 30 day warranty on our units listed under the conditions: used / refurbished / open box or new.If you are looking for a longer warranty please use the All State Protection Plan offered for an additional cost. Please be aware that we are not offering any extended warranty and any claims after 30 days would be done through that plan.Parts or Repair items are sold as is without any warranty.PRODUCT DISCLAIMERWe are not the original owner of the items we sell. Items are given a GENERAL ONCE-OVER and may have additional issues beyond the items Condition Description Section (CDS). Unless listed under refurbished items are not fully inspected. If an item is not NEW then it may have scratches, marks, dents or chips on it. We try to state this all in CDS. Product Functionality Description F1Keys Functions WorkingF2Hardware FunctionalF3Used TestedF4RefurbishedF5Like NewF6NewF7Working PullU1Untested - Nothing CheckedU2Untested - Powered on OnlyU3Tested Failed (See Test Results) Category / Cosmetic Description C1Damaged (For materials recovery - Parts)C2Used Poor (Heavy use and/or age)C3Used Fair (Moderate use and/or age)C4Used GoodC5Used Very GoodC6Used ExcellentC7Certified Pre-Owned (Seller or Manufacturer Refurbished)K1Unused Sealed BoxK2Unused Open Box Congrats you won or your offer was accepted, now what?We expect payment within two (2) calendar days of the items sold date.Non-paying Bidder Cases are automatically opened after 2 days of non-payment. Once another 2 days have passed the case is automatically closed in our favor and non-payment will be recorded on the “buyers” account.Your order will ship by its due date. Which can either be 1 or 2 business days. Please don’t send us messages asking us to ship your item out asap or today. If we get it safely packaged in time before our pick up it will happen. Messaging us actually slows down the process as our shipper does messages as well.Our feedback states a lot that items came earlier and packaged well. We ship as if it was going to be sent to us. Important information We are only working from the office from 9am to 4pm NYC (EST) Time Monday - Friday. We check for offers and messages at least once an hour during the business day.Any questions or offers outside the above stated time frame will be answered in the order received. We do our best to reply within 24 hours. Weekends and holidays are excluded as we give our team time with their families.Please do not send multiple emails as it just slows down the process of replying to you. Please check google for some answers as most times that will get you an answer faster then we can reply, especially outside business hours.If for any reason you need to return or exchange an item please let us know through ebay message BEFORE opening a return/exchange request. Once the return is open, the item must be returned even if we have more of that item.If available we can swap out a damaged or defective item for the same item.If the same item isn’t available but we have something close to it, we can offer that as a solution.Using “item not as described”, “Doesnt match description or photos”, “Received wrong item” or “Item is defective” and that is not the correct option, You will be reported.

NO REMOTE JUST THE 976 receiver Will power on but stays stuck in that mode PARTS AND REPAIR

MINT CONDITION! IN ORIGINAL BOX. Extremely high quality subwoofer, down to 17hz very clean like SVS SUBWOOFERS.

MINT CONDITION! IN ORIGINAL BOX. Extremely high quality subwoofer, down to 17hz very clean like SVS SUBWOOFERS.

Very good condition multi-channel amplifier. See photos of actual item. https://hometheaterhifi.com/volume_9_4/outlaw-audio-770-power-amplifier-11-2002.html Original box. Will ship to 48 states only - 5 business days handling time Also local pick up in central Florida area - Daytona-Orlando-Tampa Specifications:? Power output: 200 watts RMS x 7 (all channels driven simultaneously into 8 ohms from 20 Hz to 20 kHz with less than 0.05% total harmonic distortion). 300 watts RMS x 7 @ 4 ohms? S/N: 119 dB? Power Bandwidth:5 Hz - over 100 kHz (+0/-3 dB)? Damping factor: 850 (10 Hz - 400 Hz)? Input sensitivity/Impedance: 1.43 volts for full output/28 k ohms? Crosstalk: Greater than -90 dB from 20 Hz to 20 KHz? Gain: Voltage gain of 28 dB? Slew rate: 50 Volts/microsecond? Remote Trigger voltage: 3 - 32 volts DC? Power requirements: 115 V 50-60 Hz? Power consumption: 1,800 watts (maximum)? Dimensions 7 3/4 H x 17 1/4 W x 18 D? Weight: 90 Pounds? MSRP $1,799 USA

Outlaw ICBM-1 6 Channel Integrated Controlled Bass. The unit is fully functional. It included the ac power supply. Cosmetically, it shows some scratches. Please see the pictures for details.

Experience the incredible power of the Outlaw Audio Model 2200 Monoblock Solid State Amplifiers. These amplifiers are perfect for any audio enthusiast looking for exceptional sound quality. The sleek black design makes it a great aesthetic addition to any home audio system. With multiple audio inputs including RCA, and XLR, (unbalanced and balanced) this amplifier can easily connect to any audio source. The banana speaker jacks provide high-quality audio output for a superior listening experience. Whether you're listening to music or watching a movie, the Outlaw Audio Model 2200 Monoblock Solid State Amplifiers deliver outstanding audio performance. I have had this amplified for a couple years now and it has served me well. I recently upgraded and it’s time for it to go to a new home. It will be shipped appropriately for a heavy item. On Dec-07-23 at 06:20:11 PST, seller added the following information: It has come to my attention that my description makes it sound like there is more than one amplifier for sale. There is only ONE amplifier for sale in this listing. I used the automated system to write the add and did not correct it appropriately. My apologies for any misunderstanding or inconvenience.

MINT CONDITION! IN ORIGINAL BOX. Extremely high quality subwoofer, down to 17hz very clean like SVS SUBWOOFERS.

MINT condition and rarely used Outlaw 970, mint in box with all accessories, manual, remote, power cable, all in the original box with the proper and original packing foam. Fully tested and working unit. This unit is a 9/10 with no major flaws, scratches or nicks -- no disappointments here! Im also throwing in a DVI to HDMI adaptive 2m video cable. This is a fairly rare cable and makes transferring digital HDMI bound video streams possible through the 970. Please note that this unit doesnt have capability to transcode analog coaxial, S-video, or component video and upconvert to digital -- youll need a separate video cable (and related input on your TV) for each of those video types.

Experience rich surround sound with the Outlaw Audio Model 975 7.1 Preamp Processor. Its used one in pristine condition. With its sleek design and advanced technology, this preamp/processor delivers exceptional audio quality for your home entertainment needs. Perfect for amplifiers and preamps, this model features 7.1 channels and is an ideal choice for music and movie enthusiasts alike. This Outlaw Audio Model 975 is an exceptional device designed to meet all your home audio needs. With its brand value and advanced features like multiple channels, this preamp/processor delivers an extraordinary sound experience that enhances your home entertainment. Get ready to witness the perfect balance of sound and quality with this Outlaw Audio Model 975 7.1 Preamp Processor. The Model 975s many features are:•Dolby TrueHD, Dolby Digital Plus, and Dolby Digital decoding*; DTS-HD Master Audio, DTS-HD High-Resolution Audio and DTS decoding•Dolby Pro Logic IIz, Dolby Pro Logic IIx, and Dolby Pro Logic II* and DTS NEO:6** processing•All Channel Stereo•Performance Matched Op Amps in the Critical Path•High-Definition Video Scaling w/full Bypass•Quadruple Crossover Control (Separate settings for Front L/R, Center, Surround L/R, Surround Back L/R)•Lip Synch Delay•On Screen Display (via HDMI only)•32-Bit CS497024 Processor•192 kHz 24-bit DACs for all channels •4 HDMI 1080P Inputs•HDMI Output with ARC•7.1 RCA pre-amp outputs•Front height-channel outputs•4 Digital Inputs (2 coaxial, 2 optical)•2 Component Video Inputs•2 Composite and 2 S-Video Inputs•5 Analog Audio Inputs•High performance tuner•Direct access station tuning via remote control•12-Volt Trigger for remote input•Advanced LFE and Sub Level Config. Settings•Discrete IR on/off and input commands•Aluminum Front Panel

Enhance your audio experience with the Outlaw Audio 7500 power amplifier. This 5-channel amplifier delivers crisp and clear audio with a maximum power output of 200 watts per channel. The amplifier features multi-channel RCA and XLR audio inputs, as well as banana speaker jacks for output. The sleek black design of this amplifier adds a touch of elegance to any home audio setup. Ideal for amplifying your home theater or music system, the Outlaw Audio 7500 is a must-have for any audio enthusiast.

Very good condition multi-channel amplifier. See photos of actual item. https://hometheaterhifi.com/volume_9_4/outlaw-audio-770-power-amplifier-11-2002.html Original box. Will ship to 48 states only - 5 business days handling time Also local pick up in central Florida area - Daytona-Orlando-Tampa Specifications:? Power output: 200 watts RMS x 7 (all channels driven simultaneously into 8 ohms from 20 Hz to 20 kHz with less than 0.05% total harmonic distortion). 300 watts RMS x 7 @ 4 ohms? S/N: 119 dB? Power Bandwidth:5 Hz - over 100 kHz (+0/-3 dB)? Damping factor: 850 (10 Hz - 400 Hz)? Input sensitivity/Impedance: 1.43 volts for full output/28 k ohms? Crosstalk: Greater than -90 dB from 20 Hz to 20 KHz? Gain: Voltage gain of 28 dB? Slew rate: 50 Volts/microsecond? Remote Trigger voltage: 3 - 32 volts DC? Power requirements: 115 V 50-60 Hz? Power consumption: 1,800 watts (maximum)? Dimensions 7 3/4 H x 17 1/4 W x 18 D? Weight: 90 Pounds? MSRP $1,799 USA

MINT CONDITION! IN ORIGINAL BOX. Extremely high quality subwoofer, down to 17hz very clean like SVS SUBWOOFERS.

Outlaw Audio 975 With remote. I have not tested every input/output and permutation of connection types but I have tested basic HDMI in/out processing works on an HDMI input. All my items on Ebay are money back guaranteed. It will be packaged very well for shipping. Let me know if you have any questions about this item or shipping.

Outlaw Audio Model 1050 6.1 Channel ReceiverHas been fully audio tested.Warranty for 30 days, free returns.Ships out next business day.

Preowned but still in good condition For outlaw RR2150 receiver This sale is only for the remote Free ship