Nice condition,as pictured an ITT 1250/2 1974 vintage upper deck surround,as photos,any questions please ask,thanks for looking and bid with confidence

Nice condition,as pictured an ITT 1250/2 1974 vintage plastic undertray,any questions please ask,thanks for looking and bid with confidence

1 Paar Studio Lautsprecher ITT Schaub Lorenz A1 -150, in Nussbaum, gebraucht. voll funktionsfähig, bei beiden Bass Lautsprecher ist das Mittelteil eingedrückt, aber ohne Sound Beeinträchtigung.Haben ein natürliches, weiches Klangbild, perfekt für Klassik, Jazz, ...Das Chassis in Nussbaum ohne Risse, nur kleine Gebrauchsspuren.Sind seit 1981 in meinem Besitz, wg. Umzug abzugeben. Technische Daten Hersteller: ITTModell: A 1-150Typ: LautsprecherBaujahre: 1979 - 1981Hergestellt in: DeutschlandFarbe: Nussbaum, MooreicheAbmessungen: 620 x 370 x 287 mm (HxBxT)Neupreis ca.: 880 DMBauart: 3-Wege, 3 Lautsprecher, geschlossen, StudiolautsprecherChassis:Tieftöner: 300 mm KonusMitteltöner: 50 mm KalotteHochtöner: 25 mm KalotteBelastbarkeit (Nenn-/Musikb.): 100 W / 150 WWirkungsgrad:Frequenzgang: 30 - 25000 HzÜbergangsbereiche: 700 Hz, 3500 HzImpedanz: 8 OhmBesondere AusstattungenPegelregler für Mitten und HöhenÜberlastschutz für den Hoch- und MitteltönerLeistungsanzeige-InstrumentLochblenden fehlen mittlerweile

When I first turned this on and set it to play it span for a couple seconds then stopped. When you set it to play it looks like it tries to move but can’t. I’m not sure what cussing this. Comes with nothing more than what is shown.

1 Paar Studio Lautsprecher ITT Schaub Lorenz A1 -150, in Nussbaum, gebraucht. voll funktionsfähig, bei beiden Bass Lautsprecher ist das Mittelteil eingedrückt, aber ohne Sound Beeinträchtigung.Haben ein natürliches, weiches Klangbild, perfekt für Klassik, Jazz, ...Das Chassis in Nussbaum ohne Risse, nur kleine Gebrauchsspuren.Sind seit 1981 in meinem Besitz, wg. Umzug abzugeben. Technische Daten Hersteller: ITTModell: A 1-150Typ: LautsprecherBaujahre: 1979 - 1981Hergestellt in: DeutschlandFarbe: Nussbaum, MooreicheAbmessungen: 620 x 370 x 287 mm (HxBxT)Neupreis ca.: 880 DMBauart: 3-Wege, 3 Lautsprecher, geschlossen, StudiolautsprecherChassis:Tieftöner: 300 mm KonusMitteltöner: 50 mm KalotteHochtöner: 25 mm KalotteBelastbarkeit (Nenn-/Musikb.): 100 W / 150 WWirkungsgrad:Frequenzgang: 30 - 25000 HzÜbergangsbereiche: 700 Hz, 3500 HzImpedanz: 8 OhmBesondere AusstattungenPegelregler für Mitten und HöhenÜberlastschutz für den Hoch- und MitteltönerLeistungsanzeige-InstrumentLochblenden fehlen mittlerweile

1 Paar Studio Lautsprecher ITT Schaub Lorenz A1 -150, in Nussbaum, gebraucht. voll funktionsfähig, bei beiden Bass Lautsprecher ist das Mittelteil eingedrückt, aber ohne Sound Beeinträchtigung.Haben ein natürliches, weiches Klangbild, perfekt für Klassik, Jazz, ...Das Chassis in Nussbaum ohne Risse, nur kleine Gebrauchsspuren.Sind seit 1981 in meinem Besitz, wg. Umzug abzugeben. Technische Daten Hersteller: ITTModell: A 1-150Typ: LautsprecherBaujahre: 1979 - 1981Hergestellt in: DeutschlandFarbe: Nussbaum, MooreicheAbmessungen: 620 x 370 x 287 mm (HxBxT)Neupreis ca.: 880 DMBauart: 3-Wege, 3 Lautsprecher, geschlossen, StudiolautsprecherChassis:Tieftöner: 300 mm KonusMitteltöner: 50 mm KalotteHochtöner: 25 mm KalotteBelastbarkeit (Nenn-/Musikb.): 100 W / 150 WWirkungsgrad:Frequenzgang: 30 - 25000 HzÜbergangsbereiche: 700 Hz, 3500 HzImpedanz: 8 OhmBesondere AusstattungenPegelregler für Mitten und HöhenÜberlastschutz für den Hoch- und MitteltönerLeistungsanzeige-InstrumentLochblenden fehlen mittlerweile

Vintage BSR ITT Record/Vinyl Turntable - Model No. KA1026 - Used Condition - Working. Found in my Fathers Garage (carefully wrapped and stored in a packing case) is this Turntable. I believe it may have belonged to my Grandparents.............. Unfortunately, I have no idea how long its been in storage. Included in this listing is:- Original Perspex Lid - this is completely removable, rather than being attached to the Turntable;Original ITT KA1026 Turntable;Original Stylus and its Guard;Original BSR Operating Instructions and relevant Stickers for the ITT KA1026 Turntable only;Original ITT Operating Instructions for Unit Stereo KA1026. Please see all photos, as they form part of this listing. Sold as seen. Tested, as follows:- When plugged in, the On/Off Button was pressed and the Turntable turned round freely; When the Control Arm was depressed manually, it operated and moved freely; When the Starting Lever was pulled down from the Start position to Auto, the Pick Up Arm (Stylus Arm) was released from the Pick Up Clip and the mechanisms on the top of the Spindle moved to the close position - enabling the Record to drop down onto the Turntable (see Photo 12 for Record playing); Once the Record finished playing the Starting Lever moved to the Stop position; The Speed Control Lever moved freely = ie. 33, 45 and 78; The Record Size Adjuster moved freely = ie. 7, 10 and 12; The Stylus Selector moved freely; The Stylus Pressure Adjusting Screw moved freely; The lever adjusting the height of the Pick Up Arm (Stylus Arm) moved freely; Unable to check for sound quality, as I dont have the DIN Speaker Plugs - untested; At the back of the Turntable, there is an outlet for a Cassette connection - untested; To the right hand side of the Turntable there is an outlet for Headphones - untested. As this is a Vintage item, some wear and tear is to be expected:- The Perspex Lid has a chip on the back right hand corner (see Photo 15);The Spindle is a little rusty (see Photo 9).;There are also very minor signs of rust to the Metal Plate the Turntable is sat on and the 2 No. Transit Screws. Hopefully someone will be able to make use of this wonderful Turntable ......... A heavy item (6kg) so will be dispatched using Royal Mail First Class Signed For Post - see Postage. Thank you for looking!

An ITT KA1250 record player vintage 1974.working

Vintage BSR ITT Record/Vinyl Turntable - Model No. KA1026 - Used Condition - Working. Found in my Fathers Garage (carefully wrapped and stored in a packing case) is this Turntable. I believe it may have belonged to my Grandparents.............. Unfortunately, I have no idea how long its been in storage. Included in this listing is:- Original Perspex Lid - this is completely removable, rather than being attached to the Turntable;Original ITT KA1026 Turntable;Original Stylus and its Guard;Original BSR Operating Instructions and relevant Stickers for the ITT KA1026 Turntable only;Original ITT Operating Instructions for Unit Stereo KA1026. Please see all photos, as they form part of this listing. Sold as seen. Tested, as follows:- When plugged in, the On/Off Button was pressed and the Turntable turned round freely; When the Control Arm was depressed manually, it operated and moved freely; When the Starting Lever was pulled down from the Start position to Auto, the Pick Up Arm (Stylus Arm) was released from the Pick Up Clip and the mechanisms on the top of the Spindle moved to the close position - enabling the Record to drop down onto the Turntable (see Photo 12 for Record playing); Once the Record finished playing the Starting Lever moved to the Stop position; The Speed Control Lever moved freely = ie. 33, 45 and 78; The Record Size Adjuster moved freely = ie. 7, 10 and 12; The Stylus Selector moved freely; The Stylus Pressure Adjusting Screw moved freely; The lever adjusting the height of the Pick Up Arm (Stylus Arm) moved freely; Unable to check for sound quality, as I dont have the DIN Speaker Plugs - untested; At the back of the Turntable, there is an outlet for a Cassette connection - untested; To the right hand side of the Turntable there is an outlet for Headphones - untested. As this is a Vintage item, some wear and tear is to be expected:- The Perspex Lid has a chip on the back right hand corner (see Photo 15);The Spindle is a little rusty (see Photo 9).;There are also very minor signs of rust to the Metal Plate the Turntable is sat on and the 2 No. Transit Screws. Hopefully someone will be able to make use of this wonderful Turntable ......... A heavy item (6kg) so will be dispatched using Royal Mail First Class Signed For Post - see Postage. Thank you for looking!

Vintage Retro RECORD PLAYER& SPEAKERS ITT KB TWELVE - FIFTYC116 BSR Turntable MODEL: KA1250 EXCELLENT CONDITION In WORKING ORDERWith Original Operating Instructions Aux outputs for radio & tape

Vintage Retro RECORD PLAYER& SPEAKERS ITT KB TWELVE - FIFTYC116 BSR Turntable MODEL: KA1250 EXCELLENT CONDITION In WORKING ORDERWith Original Operating Instructions Aux outputs for radio & tape

1PCS NEW CA120001-181 ITT Cannon new! 1.warranty period 190 day 2.The linked picture is a real photo. On May 24, 2023 at 02:18:00 PDT, seller added the following information:

ITT ka1026 Record Deck Spares Repairs Or Restoration. From the 1970s it is clean and tidy but is for retoration only so please bear this in mind.

Vintage BSR ITT Record/Vinyl Turntable - Model No. KA1026 - Used Condition - Working. Found in my Fathers Garage (carefully wrapped and stored in a packing case) is this Turntable. I believe it may have belonged to my Grandparents.............. Unfortunately, I have no idea how long its been in storage. Included in this listing is:- Original Perspex Lid - this is completely removable, rather than being attached to the Turntable;Original ITT KA1026 Turntable;Original Stylus and its Guard;Original BSR Operating Instructions and relevant Stickers for the ITT KA1026 Turntable only;Original ITT Operating Instructions for Unit Stereo KA1026. Please see all photos, as they form part of this listing. Sold as seen. Tested, as follows:- When plugged in, the On/Off Button was pressed and the Turntable turned round freely; When the Control Arm was depressed manually, it operated and moved freely; When the Starting Lever was pulled down from the Start position to Auto, the Pick Up Arm (Stylus Arm) was released from the Pick Up Clip and the mechanisms on the top of the Spindle moved to the close position - enabling the Record to drop down onto the Turntable (see Photo 12 for Record playing); Once the Record finished playing the Starting Lever moved to the Stop position; The Speed Control Lever moved freely = ie. 33, 45 and 78; The Record Size Adjuster moved freely = ie. 7, 10 and 12; The Stylus Selector moved freely; The Stylus Pressure Adjusting Screw moved freely; The lever adjusting the height of the Pick Up Arm (Stylus Arm) moved freely; Unable to check for sound quality, as I dont have the DIN Speaker Plugs - untested; At the back of the Turntable, there is an outlet for a Cassette connection - untested; To the right hand side of the Turntable there is an outlet for Headphones - untested. As this is a Vintage item, some wear and tear is to be expected:- The Perspex Lid has a chip on the back right hand corner (see Photo 15);The Spindle is a little rusty (see Photo 9).;There are also very minor signs of rust to the Metal Plate the Turntable is sat on and the 2 No. Transit Screws. Hopefully someone will be able to make use of this wonderful Turntable ......... A heavy item (6kg) so will be dispatched using Royal Mail First Class Signed For Post - see Postage. Thank you for looking!

Vintage BSR ITT Record/Vinyl Turntable - Model No. KA1026 - Used Condition - Working. Found in my Fathers Garage (carefully wrapped and stored in a packing case) is this Turntable. I believe it may have belonged to my Grandparents.............. Unfortunately, I have no idea how long its been in storage. Included in this listing is:- Original Perspex Lid - this is completely removable, rather than being attached to the Turntable;Original ITT KA1026 Turntable;Original Stylus and its Guard;Original BSR Operating Instructions and relevant Stickers for the ITT KA1026 Turntable only;Original ITT Operating Instructions for Unit Stereo KA1026. Please see all photos, as they form part of this listing. Sold as seen. Tested, as follows:- When plugged in, the On/Off Button was pressed and the Turntable turned round freely; When the Control Arm was depressed manually, it operated and moved freely; When the Starting Lever was pulled down from the Start position to Auto, the Pick Up Arm (Stylus Arm) was released from the Pick Up Clip and the mechanisms on the top of the Spindle moved to the close position - enabling the Record to drop down onto the Turntable (see Photo 12 for Record playing); Once the Record finished playing the Starting Lever moved to the Stop position; The Speed Control Lever moved freely = ie. 33, 45 and 78; The Record Size Adjuster moved freely = ie. 7, 10 and 12; The Stylus Selector moved freely; The Stylus Pressure Adjusting Screw moved freely; The lever adjusting the height of the Pick Up Arm (Stylus Arm) moved freely; Unable to check for sound quality, as I dont have the DIN Speaker Plugs - untested; At the back of the Turntable, there is an outlet for a Cassette connection - untested; To the right hand side of the Turntable there is an outlet for Headphones - untested. As this is a Vintage item, some wear and tear is to be expected:- The Perspex Lid has a chip on the back right hand corner (see Photo 15);The Spindle is a little rusty (see Photo 9).;There are also very minor signs of rust to the Metal Plate the Turntable is sat on and the 2 No. Transit Screws. Hopefully someone will be able to make use of this wonderful Turntable ......... A heavy item (6kg) so will be dispatched using Royal Mail First Class Signed For Post - see Postage. Thank you for looking!