Excellent condition. Ships in original packaging.

Up for sale is my infrequently used HEED Quasar III phono preamp with separate PSU. I bought this new in 2022 from Analogue Seduction in the UK. It was a major upgrade from the already decent phono pre I had. It shines brightest with a high quality MC cartridge. I was using it with my Rega Planar 3 and Apheta II cart...and I used it also with a very low output Audio Technica MC with excellent results...this thing can really handle very low output carts. This preamp truly elevated my vinyl experience. This is the European version of the Quasar III power supply, Q-PSU. I emailed Hungary-based HEED support to see if I could use a transformer with this. No problem they said, so long as the transformer is double the power requirements of the HEED. For US buyers I will include the pictured transformer at no additional charge, if you need it. Its overkill for the Quasar and dead quiet and runs very cool. If you dont need the transformer, please let me know and I wont ship it, which might save me a bit on shipping. Everything has been working perfectly for me for the past year. What follows are specs and information from HEEDs site and also the conclusion from a review on Stereophile. (As the reviewer notes, the soundstage on this pre is broad. When I got it, it was astoundingly broad, compared to my previous pre.) Trust me...this is a superb preamp that punches well above its weight. Its not inexpensive new (around $1,300 new) and difficult to source in the US. Its well built. The first two pictures in this listing are the actual units themselves. The third photo is from the Stereophile review to show you how well crafted the electronics are. I found HEEDs customer support to be super responsive and if I were building a system all over again, Id be looking at a number of their offerings. From HEED: The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isn’t done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-dependent amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier. Our award-winning QUASAR phono stage, with its discrete conception and wide range of features, meets the requirements of even top-class turntable/cartridge combinations without being “unreasonable” in the usual high-end fashion. The QUASAR is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the MC cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs with different output levels make it possible to fine match for preamps or recorders.The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation.The enhanced power supply of the QUASAR, the Q-PSU that also can be used as power supply upgrade with other components, is based around a 50 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with a fine voltage regulation system, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings. FEATURES– separated MM and MC input stages– adjustable MC gain and impedance– discrete bipolar transistor architecture– separated power supply (see Q-PSU) SPECS Inputs:1x MM / 1x MCOutputs:1x 0dBm (High Out)/ 1x -10 dBm (Low Out)Frequency response:3 Hz – 150kHzInput sensitivity (MC):100 / 330 / 600 µVInput impedance (MC):100 / 470 / 1000 ?Input sensitivity (MM):2.5 mVInput impedance (MM):47 k?Gain:50 dB (MM) / 62 – 78 dB (MC)RIAA accuracy:+/- 0.5 dB (20 Hz – 20 kHz)Power supply options:Q-PSU (standard) / Obelisk PX / Thesis PiDimensions (W x H x D):9.5 x 7.5 x 22 cm CONCLUSION from the Stereophile review: I spent many a night with Heed Audios Quasar and Q-PSU, engaged in all the revelry and vinyl music-making excitement they created with boundless enthusiasm and deep soul. Like Heeds Elixir, the Quasar is very well built, and its jacks easily withstood the endless tugs and twists this audio reviewer subjected them to. It exhibited pleasing tonality from LP to LP, resolving each disc with its own unique character and a broad soundstage with a grain-free treble, and plentiful midrange and bass extension. Id long heard about this rather plain-looking, spartan phono stage—how it could transform the sounds of lesser systems, and challenge bigger comers with more hi-fi cred and glossier nameplates. The Heed Quasar is a mighty mite of musical authority, a twin-turbo phono stage that offers plenty of flexibility, a practically bombproof enclosure, and ample musical meat and value for the dollar. My brother already wants to buy one. Radically recommended! SHIPPING: Free in the US and in the original boxes, including the extra pre to power supply cable HEED provides.

Heed Audio Obelisk DA DAC in white. With original double box, includes remote control and power lead. Buffered and direct RCA, Toslink and USB outputs. In good condition and full working order. The front panel is unmarked, but there are a few slight marks on the black casing as shown.

NEU NEW Heed Audio DACtilus Hersteller: Heed AudioDesign: Heed AudioFür Obelisk i und Si Der neue, ideale Spielpartner für den Heed Audio DT und mehr!Der Heed Audio DACtilus 2 ist ein wunderbar musikalisch abgestimmer D/A Wandler, der ohne Härten im Klangbild aufspielt. Zum einen in Kombination mit dem Heed Audio DT das perfekte Ensemble, ist der Heed Audio DACtilus 2 zudem eine gute Möglichkeit, bestehende Digitalquellen, wie zum Beispiel CD/DVD-Spieler, SAT-Receiver und Spielkonsolen, klanglich sehr deutlich aufzuwerten. Die DACtilus 2 Karte liefert eine nochmals enorm gesteigerte Klangqualität im Vergleich zum DACtilus 1.Die Heed Audio DACtilus 2 D/A Wandler-Karte zum Einbau in die Heed Audio Obelisk Vollverstärker und Obelisk Vorstufen ist technisch identisch zur extern einsetzbaren Version des DACtilus mit eigenem Gehäuse und eigener Stromversorgung.Die technischen Daten der Heed Audio DACtilus 2 D/A Wandler-Karte für Obelisk i und Si:- Frequenzgang (3 Hz-21 kHz): +/-0.2 dB- Klirrfaktor (0 dB, 1 kHz): < 0.005 %- Dynamikumfang: 96 dB- S/N-ratio: 97dB (A-gewichtet)- Kanaltrennung: 90 dB- Output level bei 0 dB: 1,21 Vrms- Auflösung/Sampling: 24 Bit/192 kHz- Format: Multibit Delta/Sigma Konverter mit passivem analogen Filter- Digital-Eingänge: 1x75 Ohm Coax (SPDIF) / 1 x ToslinkDie Presse über den Heed Audio DACtilus: - fairaudio 05/2010: Die Heeds spielen übrigens auch mit anderen Komponenten sehr hübsch zusammen. So habe ich im Test mal bei meinem Marantz SA7001 SACD-Spieler das Digitalsignal abgegriffen und dem Heed-internen DAC zugeführt. Praktischerweise ließ sich ja der Analogausgang auch direkt anschließen und so im Direktvergleich umschalten. Zähneknirschend musste ich gestehen, dass der Heed Obelisk PRE mit dem Dactilus 2 dem Marantz-internen Wandler hörbar überlegen ist, und zwar wiederum ganz klar im Bereich Detailliertheit und Feinauflösung. (Jochen Reinecke)Lieferumfang: Eine Heed Audio DACtilus D/A Wandler-Karte zum Einbau in den Obelisk i und Si.Dieses Produkt ist Made in Europe (Ungarn)!

Heed Obelisk Si III - Auspackware - Hersteller: Heed AudioDesign: Heed AudioBxHxT: 22x8,5x36 cmDas audiophile Kraftwerk – Auspackware von BT HiFi Vertrieb – Verpackung nur zu Fotozwecken geöffnet – zum Sonderpreis!Der Heed Obelisk Si s3 Vollverstärker ist eine Offenbarung für all diejenigen, die seit langem auf einen Verstärker warten, der in die Fußstapfen früherer legendärer, kleiner Vollverstärker, wie z.B. des Nytech Obelisk tritt, und für einen verhältnismässig moderaten Preis einen kompromisslosen und puristischen Schritt in High-End-Hi-Fi bietet! Endlich wieder ein Klassiker.Ein optionales Phono MM-Modul oder ein optionaler D/A Wandler mit hohem klanglichen Anspruch sind preisgünstig in Form einer Steckkarte nachrüstbar. Eine Fernbedienung zur Lautstärkeregelung ist im Lieferumfang des Heed Audio Obelix Si enthalten.Der Heed Audio Obelisk Si ist mit einem zusätzlich erhältlichen externen Netzteil (X-2) zu einer echten Vor-/Endstufenkombination ausbaufähig, die, im Gegensatz zu Vollverstärkern mit einem normalen externen Netzteil, das interne Netzteil nur für die Vorstufensektion nutzt. Im Zuge dieser Aufrüstung steigt die Nennleistung erheblich an (von 40,5 Watt auf 55 Watt) pro Kanal.Die technischen Daten des Heed Audio Obelisk Si s3 Vollverstärkers:- Eingänge: 4 bzw. 5 Line(der Eingang Nr. 1 kann mit einer optionalen D/A-Wandlerkarte DACtilus oder Phono MM-Karte ausgestattet werden)- Ausgänge: 1 Vorverstärkerausgang oder Fixed/Tape-Ausgang (per Jumper)- Eingangsspannung/Impedanz: 500 mV/10 kOhm- Ausgangsleistung (20 Hz-20 kHz): 40,5 W / 64 W (8/4 Ohm)- Ausgangsleistung (20 Hz-20 kHz) mit Zusatznetzteil X-2: 55 W / 72 W (8/4 Ohm)- Rauschabstand: 96 dB- Klirrfaktor: 0,08%- Frequenzgang (mit Filter): 10 Hz-60 kHz (+-1 dB)- Max. Leistungsaufnahme: <160W (mit Zusatznetzteil X2 <200W)Die Presse über den Heed Audio Obelisk Si Vollverstärker: - Hifi & records 02/2008: Der Heed Obelisk Si ist ein ganz feiner Vollverstärker, der schon im Alleingang zu überzeugen weiß. Verstärkt um das optionale X-2 Netzteil reicht sein klangliches können weit über seine Preisklasse hinaus. Wer den Klang über die wenig opulente Optik stellt, kann mit dem Obelisk Si fraglos glücklich werden. Der Heed ist ein Understatement in Reinkultur und verdient eine ganz, ganz dicke Empfehlung! (Helmut Rohrwild)- Image Hifi 02/2009: Diesem Vollverstärker geht ein Ruf wie ein Donnerhall voraus. Mit Recht? ... Der Obelisk Si ist ihr ein genialer Vermittler. Der weltweite Kult ist vollkommen berechtigt. (Heinz Gelking)Hifi Statement 2009: Wenn ich zwei Worte wählen müsste, um den Heed Obelisk Si zu beschreiben, so sind dies Lebendigkeit und Spaß. Sehr empfehlenswert! (Markus Sauer)Lieferumfang: Ein Heed Audio Obelisk Si III Vollverstärker mit Fernbedienung und Netzkabel und Garantieunterlagen.Dieses Produkt ist Made in Europe (Ungarn)!Neuware (nur ausgepackt zu Fotozwecken) zum Sonderpreis – unverbindliche Preisempfehlung des Herstellers: 1.899,00 €

NEU NEW Heed Audio DACtilus Hersteller: Heed AudioDesign: Heed AudioFür Obelisk i und Si Der neue, ideale Spielpartner für den Heed Audio DT und mehr!Der Heed Audio DACtilus 2 ist ein wunderbar musikalisch abgestimmer D/A Wandler, der ohne Härten im Klangbild aufspielt. Zum einen in Kombination mit dem Heed Audio DT das perfekte Ensemble, ist der Heed Audio DACtilus 2 zudem eine gute Möglichkeit, bestehende Digitalquellen, wie zum Beispiel CD/DVD-Spieler, SAT-Receiver und Spielkonsolen, klanglich sehr deutlich aufzuwerten. Die DACtilus 2 Karte liefert eine nochmals enorm gesteigerte Klangqualität im Vergleich zum DACtilus 1.Die Heed Audio DACtilus 2 D/A Wandler-Karte zum Einbau in die Heed Audio Obelisk Vollverstärker und Obelisk Vorstufen ist technisch identisch zur extern einsetzbaren Version des DACtilus mit eigenem Gehäuse und eigener Stromversorgung.Die technischen Daten der Heed Audio DACtilus 2 D/A Wandler-Karte für Obelisk i und Si:- Frequenzgang (3 Hz-21 kHz): +/-0.2 dB- Klirrfaktor (0 dB, 1 kHz): < 0.005 %- Dynamikumfang: 96 dB- S/N-ratio: 97dB (A-gewichtet)- Kanaltrennung: 90 dB- Output level bei 0 dB: 1,21 Vrms- Auflösung/Sampling: 24 Bit/192 kHz- Format: Multibit Delta/Sigma Konverter mit passivem analogen Filter- Digital-Eingänge: 1x75 Ohm Coax (SPDIF) / 1 x ToslinkDie Presse über den Heed Audio DACtilus: - fairaudio 05/2010: Die Heeds spielen übrigens auch mit anderen Komponenten sehr hübsch zusammen. So habe ich im Test mal bei meinem Marantz SA7001 SACD-Spieler das Digitalsignal abgegriffen und dem Heed-internen DAC zugeführt. Praktischerweise ließ sich ja der Analogausgang auch direkt anschließen und so im Direktvergleich umschalten. Zähneknirschend musste ich gestehen, dass der Heed Obelisk PRE mit dem Dactilus 2 dem Marantz-internen Wandler hörbar überlegen ist, und zwar wiederum ganz klar im Bereich Detailliertheit und Feinauflösung. (Jochen Reinecke)Lieferumfang: Eine Heed Audio DACtilus D/A Wandler-Karte zum Einbau in den Obelisk i und Si.Dieses Produkt ist Made in Europe (Ungarn)!

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Hello, I am selling a used Heed Audio Canamp headphone amp. The unit is in very good condition and it does not have any scratches. The headphone amp does not have very many hours on it. We only listen to for an hour or less. We are the original owners of the unit. We will double box it when we will ship it. If you have any questions or need more photos, just ask.

Hello, I am selling a used Heed Audio Canamp headphone amp. The unit is in very good condition and it does not have any scratches. The headphone amp does not have very many hours on it. We only listen to for an hour or less. We are the original owners of the unit. We will double box it when we will ship it. If you have any questions or need more photos, just ask.

Here is an opportunity to get into a real high-end phono preamp for budget money. I am selling my Heed Quasar phono preamp from my own personal collection. I have way too many phono preamps and I will be selling all but one. Thanks for looking and feel free to ask questions and/or advice. This is my hobby and I enjoy helping others when I can. The signal processing of cartridges is one of the most delicate jobs in amplification. All the more so because it isnt done merely by boosting a few hundred microvolts to a few hundred millivolts. In fact, at this thousandfold amplification (60 dB) the signal must be processed as cleanly and noise-free as possible. The extremely low signal level and the frequency-related amplification which arises from the RIAA equalisation curve applied in the cutting of LPs make the highest demands of the circuit topology and technical realisation of a phono preamplifier.The Quasar, with its discrete conception and wide range of features, represents a unique bargain at this price level. The Quasar is built in dual-mono configuration from the power supply upwards. There are two separate amplifier stages for MM and MC cartridges, both being fed from their own regulated power supply arrangement. Optimum adjustments to the cartridge in use can be applied for sensitivity and load by various settings of the jumpers on the PCB. The two separate outputs of the Quasar with different sensitivities make it possible for preamps or recorders to be fed via Low Out, whilst its High Out can drive power amps directly.The output stage has huge headroom at extremely low noise levels and, due to its low output impedance and high current delivery, can drive long interconnect cables without any sonic degradation. The enhanced power supply of the Quasar is based around a 60 VA toroidal transformer with low-density magnetic field and very little dispersion. This power, together with 40,000 mF filtering, can feed the circuit with the kind of super-clean current usually delivered only by battery-based supplies, even with extreme dynamic swings.The entirely discrete conception, as well as the short signal paths of the Quasar, combine the best audiophile tradition with innovative circuit design. This new phono preamplifier makes analogue high-end reproduction affordable at last! The Quasar was awarded first prize for Best Phonostage in 2002 at the biannual Image Hifi Awards in Germany, one of Europes premier hi-fi accolades.Specifications:MM input: 5 mV /47 kOhm / 100 pFMC input: adjustableSensitivity: 100 µV - 200 µV - 600 µVImpedance: 100 Ohm / 220 Ohm / 470 OhmOutput voltage: Low Out: 220 mV/100 OhmOutput voltage: High Out: 775 mV (0 dBm)/ 22 Ohm MSRP: $1299.99 Reviewed very highly in Stereophile https://www.stereophile.com/content/heed-audio-quasar-phono-preamplifier Please ask questions before purchasing

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier

Heed Audio Elixir Integrated Amplifier With MM Phono Stage Black £1599 RRP First owner, manufactured 2021, in perfect working condition, no scratches, no chips. In original packaging, with remote control, power cable and user manual. Selling because I upgraded to the Lagrange model. The Elixir, from Budapest based Heed Audio is a compact five-input integrated amplifier with built-in moving magnet phono stage and dedicated headphone amplifier, that is designed to provide the world class Heed sound quality in a one box solution, and at a lower price point than the existing Heed products. A Class A headphone amplifier and enhanced MM phono stage provide increased functionally for users wanting a simple audio solution. Utilising the capacitor coupling principle borrowed from the Heed Audio TransCap amplifiers, such as the award winning Obelisk SI, ensures a similar sound quality and power output. The power amplifier output of 50W per channel at 8 ohms, or 65W into 4 ohms, provides plenty of power for the loudspeakers connected to the Elixir, enabling use of pretty well any model the user chooses. With four pairs of RCA line inputs, one pair of RCA MM phono inputs and two pairs of 4mm speaker connectors, along with a pair of pre-amp outputs, Elixir specifications are kept simple for the beginner, but afford expandability if you want it. Manufacturers Specifications Inputs - 4x line analogue / 1x MM phono Outputs - 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out Freq. response (speakers) - 10 Hz – 110 kHz Freq. response (preamp) - 3.5 Hz – 300 kHz Freq. response (headphones) - 3.5 Hz – 320 kHz Input impedance (line) - 10 k? Input impedance (MM) - 47 k? / 100 pF Input sensitivity - 135 mV Power (8?) - 50 W / channel (55 W peak / ch) Power (4?) - 65 W / channel (90 W peak / ch) Max. consumption - 150 W Idle consumption - 20 W Weight - 6 kg Dimensions (WxHxD) - 22 x 8.5 x 36 cm Reviews: https://www.stereophile.com/content/heed-audio-elixir-integrated-amplifier https://www.stereonet.com/uk/reviews/review-heed-elixir-integrated-amplifier