GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

Tested everything works great. Unit is in great condition and was well taken care of. Includes remote control, which is also in pristine condition! See pictures. Does not come with the original box, but I will make sure to package the unit with great care This Nakamichi cassette player and recorder is a top-of-the-line model with a variety of features and functions. It comes with a wireless infra-red remote connectivity system, allowing you to control the deck from across the room. The gear drive for the spool motor and the direct drive capstan motor ensure smooth and precise playback, while the pressure pad lifter helps preserve the quality of your tapes. Some other features of this cassette deck include auto tape sensing, real-time elapsed/remaining display, and auto calibrate bias/level/azimuth for optimal recording quality. The 60dB wide fluorescent display provides clear and easy to read information, and the auto azimuth adjust play head ensures accurate playback. This unit is in excellent condition and ready for use.

Very nice condition Was just in use but owner had to move into a nursing home No remote Comes with cords as shown No reserve auction

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

Unit powers on. All buttons illuminate. Everything seems to work fine except the gear that spins the cassette tape does not spin. If you hit play or fastforward rewind, etc, the unit seems to try for a moment and then jumps to stop/pause automatically. I have no idea if this is an easy fix and the unit can be repaired easily? I do not know the unit very well. The player is in excellent cosmetic condition. Very little wear or scuffs. See pictures. Remote not included. Does not come with the original box, but I will make sure to package the unit with great care This Nakamichi cassette player and recorder is a top-of-the-line model with a variety of features and functions. Some other features of this cassette deck include auto tape sensing, real-time elapsed/remaining display, and auto calibrate bias/level/azimuth for optimal recording quality when working properly. The 60dB wide fluorescent display provides clear and easy to read information.

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

Has original invoice and payment receipt. I purchased this from the home of the original owner. 1 owner since new It powers up and everything seems to function properly including the remote. I am not familiar with home audio so please understand that I do not know how to properly test this. It’s in fantastic shape but I make no guarantees. When I put a tape in it will rewind and fast forward but when I press play it begins to turn then stops. Not sure if it’s my tape or the settings on the unit. All offers are considered. Enhance your audio experience with the Nakamichi 3 Head CR 7A cassette deck. This black beauty is equipped with features like auto tape sensing, gear drive for spool motor and direct drive that make it a cassette player and recorder with a difference. The wireless infra-red remote connectivity adds to the convenience of the user. The cassette deck comes with a pressure pad lifter and a direct drive capstan motor that ensure superior sound quality. The real-time elapsed/remaining display gives the user an accurate idea of the time remaining on the cassette tape. The auto-calibrate bias/level/azimuth and 60dB wide fluorescent display are some of the other outstanding features of this Nakamichi cassette deck.

Nakamichi CR 7A - Discrete 3 Head Cassette Recorder with Automatic Record level/bias CalibrationManual ( also remotely) Play Head azimuth adjusting recorder.Gear Drive for Spools - unlike many listed have only idler DriveDirect Drive for Capstans and Dual Pressure Pad-less - reason for 10000 Hours life on the Play/record heads Late Production Model (Year 1987) Pictures speak for the condition Gear Drive /Serviced / Calibrated using Nakamichi Alignment Tapes/ Tools Cam Motor was replaced with new one Power Supply Capacitors were replaced with new Nichicon Caps Buy it now and a get a RM7C wireless remote free with this item. In case of Offers through Best Offer, this listing is for CR 7A with printed user manual only. So if you do not want the RM 7C you can offer your best offer. Please go through the Ebay Feedback on various Nakamichi Cassette recorders as well as other items that I sold ( many of them CR 7A) If you are keen on brand new unused CR 7A with box/Remote/User Manuals please contact me First - this Recorder is not just working but working correctly as it should ( I keep seeing listing stating as working Deck without any explanation?) CR 7A needs complete adjustment using special Electronic tool for Correct Bias for each type of Tape / DA converter adjustment and Azimuth adjust knob alignment. There are close to 25 steps to align this deck to make it work as it should including each tape type record replay response for 400Hz/15 Khz Considering the Digital Multi Meter should have close to 200 Khz response ( not just any DMM)I use 2 Fluke 867B along with VTVM having still higher bandwidth. Using the Play head azimuth, Record head current for each tape type as well as Azimuth / track alignment needed to set it up for Recording alignment. If these were done correctly along with internal Pot adjustment, Autocalibration will result in Precise Response Since I keep seeing certain Electrolytic Caps in Power Supply failing in CR 7A/5A - These were replaced along with other service Finally I only offer Deck with new Belts and checking record replay response Finally - it will come with brand new Maxell XL II Tape - just calibrated and sample recording as reference to the buyer. A printed user manual will be sent for ease of operating this equipment. This will be packed with excessive care to get it to the buyer as in the picture. If you like to ask questions, please do without hesitation - you will get a response I reserve the right to cancel this listing anytime

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

Description: RCA VR619HF Double Azimuth Hi Fi Stereo Video Cassette Recorder Not Tested Brand: RCA Material: Various Condition: Used, In Good Condition Color: Black NOTES: Please See Photos Disclaimer: All items are described to the best of our abilities. All measurements are approximate and measured in inches. Please see and review pictures for more details. Please ask all questions prior to bidding. All auctions are SOLD AS-IS with no warranty or guarantee. **Please ask any questions before placing a bid****Physical Certificate of Authenticity is not provided, winning bidder is free to print at their own leisure. ** **Items have Not Been Tested unless otherwise stated** ***Items that have been authenticated, will have the COA included in the pictures in the auction, and the auction will say Authentic*****Please note that the COA shown in auctions, for items that are authentic, will not be included with shipping. Winning customer is free to print out the certificate shown in the auction, or save it from the auction, if need be.** **We are not currently offering local pickup at this time. Any won auction must be shipped from our location** Shipping Advice *Please understand shipping prices from USPS and FED EX are weight and zone based we do not make up shipping prices. *We will do our very best to assist you saving on shipping - we allow combining items (PLEASE JUST SEND US A TICKET WITH YOUR ITEM NUMBER) *Once an order has been paid for we are unable to modify* *Please email us an order number when you have all your items in your shopping cart, we will take a look to see if we can modify your shipping to save you money. RETURN POLICY All items are sold as is unless otherwise stated on the listing. Items described as (not tested) are NOT eligible for return - all other returns must have prior authorization- **we do not refund shipping and handling charges unless otherwise specified**

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).

GennLab Azimuth Alignment Cassettes.Following options are available315 Hz, 6.3, 8, 10, 12.5, 14 or 15 kHz Azimuth Test Cassette/Tape.Please note. These cassettes are 90 degrees ANGLE cassettes. They can not be used to equalize channel outputs or as Frequency Response cassettes.Suitable for Playback Head Azimuth alignment of any Cassette Tape Deck using a dual trace oscilloscope (minimum difference in phase between channels) or an AC millivoltmeter (maximum Output Level)Only new TDK, TEAC, MAXELL, SONY, AMPEX or RTM 17u tape is used when recording. Azimuth cassettes are recorded IN SHELL using a tape recorder with Record head azimuth control during recording.Time Constant: 3180us + 70usRecord Level: 20dB below 200nWb/m @ 400Hz. To order a cassette with different Record Level go to the TEAC Calibration Cassettes or SONY Calibration Cassettes page of GennLab.Frequency fluctuation: +/-0.01% measuredVertical azimutn angle: 90 degr. +/- 2 minDuration 10 min recorded in the MIDDLE of the Tape from 2 min 30 sec to 12 min 30 sec for the 1-7/8 ips tape.Please specify cassette Frequency from the following options:315 Hz, 6.3 kHz, 8 kHz, 10 kHz, 12.5 kHz, 14 kHz, 15 kHz, andcassette Speed from the following options:15/16 ips (2.38125 cm/sec), 1-7/8 ips (4.7625 cm/sec), 3-3/4 ips (9.525 cm/sec), 7-1/2 ips (19.05 cm/sec), 15 ips (38.1 cm/sec).