Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

Arcam P1000 7 Channel Power Amplifier - 7x135w Functioning Properly - Some scratching, Nicks, Dings, and Wear Marks. Offer Update: Received several offers of $400 - $450, all declined at this time. Check back later as this item was recently listed.

Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

This Arcam P1000 7 channel power amplifier has been fully tested by a technician to ensure optimal performance. It is a top-of-the-line device that features stereo L/R RCA and XLR audio inputs, as well as 7 inputs and outputs for maximum flexibility. The amplifier is designed to deliver high-quality sound to enhance your home audio experience. Plenty or reviews out there. Sold for an estate sale clearance so no Returns, Refunds or Exchanges. Rated low as such. Sold as is fully tested with paperwork from technician.

Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. One speaker terminal nut is broken but output is still functionalSpecifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kg

This Listing is for a Arcam P1000 7X135 Watt Power Amplifier Condition: Item has some signs of wear including some scratches or scuffs. Please see photos for a better idea of condition. Item was tested for basic functionality. Specifications:Power output: 135 watts per channel into 8? (7 channels)Frequency response: 2Hz to 50kHzTotal harmonic distortion: 0.08%Gain: 29 dBInput sensitivity: 0.25VSignal to noise ratio: 110dBSpeaker load impedance: 4? to 16?Dimensions: 430 x 400 x 133 mmWeight: 18kgFinish: black, silverYear: 2005 30 Day Return Policy: This product is covered by our 30 day return policy with buyers responsible for return costs. Returning the package safely is your responsibility. Upon receipt of any return, we first inspect the item condition, then refund the appropriate amount. First and foremost, please communicate. If there is an issue or an un-satisfactory aspect of your interaction, contact us. We work hard to find creative solutions that work well for you. We fulfill orders within one business day of posted payment in MOST cases. Items that require specialty packaging may have up to a three day handling period. Orders will ship via FedEx, UPS, or USPS. Please be sure the address listed on your account is the correct shipping address. We are here Monday-Friday. Inquiries placed over the weekend will be reviewed the start of the following week.

Arcam BDP100 Blu-Ray Player. I am reluctantly selling the main digital source from my system - but I just don’t have the room for it anymore and find myself either streaming or playing LP’s. I have been using this almost exclusively as a high end CD player which it is ideally suited to, especially paired with a good DAC. Oh - and it plays DVDs and Blu-Rays. I don’t think the reviews at the time praised it too much on the video side of things, but was always a solid audio player. Built like a brick outhouse. Comes with original box, packaging, remote and instructions plus power cable. Read the brief below from Arcam. This is a 100% Australian delivered model. Region B Blu-ray and Region 4 DVD. Is in great overall condition with the exception of an small annoying scratch near the logo on the bottom LHS of front panel. See photo. Using Arcam’s unique expertise has allowed the extraction of the very best video and audio performance from a digital source. The BDP100 uses a very simple, almost direct video path from the disc right through to its high precision outputs. This very direct path allows the video signal to be presented without unnecessary disruption giving a presentation that will truly captivate the viewer. Using broadcast quality digital video clocks during the process means the resulting picture quality is simply stunning. To ensure the BDP100’s music performance meets the same “reference” standards the class-leading Wolfson Audio 8741 digital to analogue converter (DAC) is used. This device, coupled with a linear phase Bessel output filter and high precision re-clocking system results in an audio performance comparable to a dedicated audiophile CD player. Even the BDP100’s power supply has been specially designed for outright performance. Discreet sub-regulated power supplies on the drive, audio and DAC boards deliver significant benefits to the overall performance of each element and thus allow each section to work truly independently and without interference. To minimise the effect of radio frequencies (RF) from interfering with the BDP100’s high performance circuitry the Arcam development team have used its “Mask of Silence” techniques to shield important signal paths. The difference this technology makes is significant and is unique to Arcam. As with all its FMJ units, Arcam has gone to incredible lengths to maximise the performance of this new player. As an example the BDP100 benefits from a critically damped cover to virtually eliminate damaging microphonic vibration from reaching the sensitive electronics inside. In addition, while other Blu-ray devices can suffer from slow disc load times, the BDP100 has been optimised to make the journey from disc insertion to playback as fast as possible. The BDP100 is designed with a single purpose; to deliver the very best music and movie experience for discerning owners. It also features a full suite of discrete IR and RS232 codes making it perfect for integration within a high performance home cinema installation. TECHNICAL SPECIFICATIONS Audio Outputs HDMI (v1.3a) Coaxial digital (RCA Phono) Optical digital (Toslink) Zone 1 analogue (RCA Phono) Zone 2 analogue (RCA Phono) Output Level (0DBFS): 2.2VRMS THD+N (0dBFS, 1kHz, 22Hz to 22kHz, unweighted): 0.002% Video Outputs HDMI (v1.3a) – inc. Deep Color Component video (3x RCA Phono) Composite video (RCA Phono) Compatibility Disc types:- Blu-Ray Disc (BD) including BD Live, DVD-Video, DVD-R, DVD-RW, CD-Audio (CDDA), CD-R, CD-RW Codec Support Dolby TrueHD DTS Master Audio MP3 - Sample rate 44.1kHz, 48kHz, Bit rate up to 320kbps WMA - Sample rate 44.1kHz, 48kHz, Bit rate up to 192kbps JPEG - Maximum resolution 4272x2848 pixels AVI - Codec Xvid, Image size 1920x1080 @30fps WMV - Codec WMV9 Image size 1920x1080 @30fps Custom Install Features RC-5 remote input Full suite of discrete IR RC-5 codes, including separate on / off etc 12Volt trigger Full duplex RS232 control input for more complex control systems General Supplied with remote control Large, high contrast dimmable VFD front panel display Universal mains power supply (100-240v) Size – 435mm (17.1in) wide, 400mm (15.7) deep, 100mm (3.9in) high Weight 6.2kg (13.7lbs) nett, 10.0kg (22.0lbs) packed

Functionality: The device has been tested and works great! The unit was removed from a functional environment. Power output: 135 watts per channel into 8? (7 channels) Frequency response: 2Hz to 50kHz Total harmonic distortion: 0.08% Gain: 29 dB Input sensitivity: 0.25V Signal to noise ratio: 110dB Speaker load impedance: 4? to 16? Dimensions: 17x16x5.5 inches Weight: 40Lbs Finish: Silver Features: • Brand: Arcam • Model: P1000 • Color: Siver • Accessories: Power cord • Power Amplifier • *Please note, if it is not listed it is not included - such as power cables or other accessories. Condition: Pre-Owned Good The device is in good pre-owned condition. The housing and outside are in good condition. There are some scuffs/scratches from normal wear. The buttons, dials, and ports are clean and clear. Please view my pictures for more details, as these are taken of the actual item being offered for sale. Feel free to contact me with all your questions about my products. Thank you for your time and interest, Have a great day! PAYMENT: We will accept any Paypal payment with any PHYSICAL address you put into the shipping field on the payment. We are unable to accept PO, APO, and FPO addresses SHIPPING: Item will be professionally packaged and shipped within 3 business after payment cleared. All our products are well-packed and insured. I also have an excellent track record of secure packaging!! LOCAL PICK-UP IS ALWAYS WELCOME! FOR INTERNATIONAL: Puerto Rico, Hawaii, and Alaska shipping, additional handling time may apply. If outside of the continental U.S. please contact us to confirm a shipping quote prior to purchase. BUYERS ARE RESPONSIBLE FOR ALL IMPORT TAXES AND DUTIES! We reserve the right to require a signature confirmation for any item valued over $250 and to refuse shipment to any address that is not a confirmed billing address or confirmed Paypal address. Return shipping costs will be the responsibility of the buyer for ALL returns for any reason with International orders I will always try to respond to every question in a prompt manner. Please ask all questions prior to bidding and allow up to 24 hours for a response. Thank you. RETURNS: No return accepted at the moment (only under special circumstances return will be accepted) Track Page Views WithAuctivas Counter

Arcam P1000 7-Channel Power Amplifier and Arcam AVP700

Arcam P1000 7 Channels Power Amp. All channels in excellent conditiion. Blemishes..see pics.

Arcam P1Designed as a no-compromise solution for audio and AV systems, the FMJ P1 monobloc Power Amplifier is the ideal partner for the forthcoming C31 Preamplifier or the FMJ processors.The P1 is the ultimate expression of Arcam’s ultra wide bandwidth power amp design, built to take full advantage of the latest high resolution audio formats such as SACD for two stereo music and Dolby TrueHD and DTS Master Audio form home cinema. Its extremely low noise and distortion, together with a wider audio bandwidth mean the P1 is ready for the challenge of these newer formats with a total harmonic distortion of just 0.003%.The flagship P1 is unquestionably a class leading power amplifier. Its circuit design is elegant and innovative and uses plated through circuit boards with surface mounted components. The whole amplifier is dc coupled from input to output with absolutely no capacitors in the signal path. The power supply is built around a substantial toroidal transformer, giving a continuous output power of more than 170 watts per channel into 8 ohms and 250 watts into 4 ohms. The power amplifier has a fully symmetrical high current output stage and novel current feedback loop which dramatically reduces harmonic distortion. Put simply, the P1’s technical specification is state of the art.TECHNICAL SPECIFICATIONSPower amplifier features175wpc continuous power output (8ohms, one channel driven)250wpc continuous power output (4ohms, 1kHz, one channel driven)Fully discrete transistor power amp stages with temperature compensationCurrent feedback design ensuring wide bandwidth for high resolution audioBalanced (XLR) and unbalanced (RCA Phono) inputAll DC coupled signal path for enhanced bass controlTwin RCA Phono input for loop through to second power ampPower supply featuresMassive toroid mains transformerUser switchable between 115v and 230v mains suppliesDual rectified power amp supplies for reduced ground noiseGeneral FeaturesAll gold plated input / output connectorsSize – 430mm (17) wide, 370mm (14) deep, 110mm (4.2) highWeight 12.5kg (27.5lbs) nett, 15.4kg (33.9lbs) packed Note: This is a SINGLE mono-block amplifier, NOT stereo amplifier.

Arcam P1000 7-Channel Power Amplifier and Arcam AVP700

Arcam P1Designed as a no-compromise solution for audio and AV systems, the FMJ P1 monobloc Power Amplifier is the ideal partner for the forthcoming C31 Preamplifier or the FMJ processors.The P1 is the ultimate expression of Arcam’s ultra wide bandwidth power amp design, built to take full advantage of the latest high resolution audio formats such as SACD for two stereo music and Dolby TrueHD and DTS Master Audio form home cinema. Its extremely low noise and distortion, together with a wider audio bandwidth mean the P1 is ready for the challenge of these newer formats with a total harmonic distortion of just 0.003%.The flagship P1 is unquestionably a class leading power amplifier. Its circuit design is elegant and innovative and uses plated through circuit boards with surface mounted components. The whole amplifier is dc coupled from input to output with absolutely no capacitors in the signal path. The power supply is built around a substantial toroidal transformer, giving a continuous output power of more than 170 watts per channel into 8 ohms and 250 watts into 4 ohms. The power amplifier has a fully symmetrical high current output stage and novel current feedback loop which dramatically reduces harmonic distortion. Put simply, the P1’s technical specification is state of the art.TECHNICAL SPECIFICATIONSPower amplifier features175wpc continuous power output (8ohms, one channel driven)250wpc continuous power output (4ohms, 1kHz, one channel driven)Fully discrete transistor power amp stages with temperature compensationCurrent feedback design ensuring wide bandwidth for high resolution audioBalanced (XLR) and unbalanced (RCA Phono) inputAll DC coupled signal path for enhanced bass controlTwin RCA Phono input for loop through to second power ampPower supply featuresMassive toroid mains transformerUser switchable between 115v and 230v mains suppliesDual rectified power amp supplies for reduced ground noiseGeneral FeaturesAll gold plated input / output connectorsSize – 430mm (17) wide, 370mm (14) deep, 110mm (4.2) highWeight 12.5kg (27.5lbs) nett, 15.4kg (33.9lbs) packed Note: This is a SINGLE mono-block amplifier, NOT stereo amplifier.

Arcam P1000 7-Channel Power Amplifier and Arcam AVP700

Welcome to the ARCAM BDP100 BluRay Player Black. High End Universal Disc Player Plays BluRay DVD CD Amongst other formats Great condition In full working order Remote is on order will be in stock soon Brilliant picture and sound Good luck

Arcam P1000 7-Channel Power Amplifier and Arcam AVP700

Auction for the Arcam P1000. This is a 7-channel power amplifier in excellent cosmetic and working condition. Perfect for stereo 2-channel or to power 7-channels in a cinema surround setup. Has connections for RCA (unbalanced) and XLR (balanced) inputs. Thanks for looking.7-Channel power amplifier,trigger connectionRCA inputs (x7)XLR inputs (x7)

Arcam P1000 7-Channel Power Amplifier with RCA & XLR inputs.

This auction is for an Arcam BDP100 Blu-Ray CD DVD Player. Unit is in full working order with some light sign of use. This was a top of the line model and cost £1000 at launch. Unfortunately the remote control is missing, but a replacement can be found online. I always start my auction at 99p to save on listing fees, so bid with confidence. Check my feedback. Due to the size and weight, this is for collection only from Woking, Surrey (GU21). Any questions please ask and thanks for looking.