This vintage Rega R200 tonearm is in very good cosmetic condition and perfectly working.The tonearm was serviced in our workshop, the bias belt replaced with a new one and professionally rewired with our renowned full Litz low capacitance rewire kit.If you are looking for a trouble-free Rega R200 this is the one for you.No headshell included, but any standard SME-style headshell will fit.Glad to answer any question.

Vintage REGA R200 For Parts Or Repair Turntables Recordplayer Parts. This is sold for parts or repair. Counterweight is mint. The bearings appear fine. Cue lift, antiskate knob and arm appear in good order. Final sale sold as is.

Vintage Rega R200 Tone Arm. The black nylon dial is missing where it says anti skating, apart from that everything looks to be in order on this classic tone arm. This is being sold as spares or repair so please study photos and bid accordingly.

Vintage Rega R200 Tone Arm. The black nylon dial is missing where it says anti skating, apart from that everything looks to be in order on this classic tone arm. This is being sold as spares or repair so please study photos and bid accordingly.

Rega R200 Tonearm and Headshell Nice condtion All our equipment is assessed and are sold in good faith. We offer a Full Money Back Guarantee should you find that something doesnt work as intended. PaymenteBay, Bank Transfer, or Cash on Collection ShippingCollection from Bristol BS7 - FreeUK Mainland from £9.90France, Germany, and most of Europe from £19.90Rest of the World from - Please ask Please Note: A signature is required on delivery Non UK Customers - ImportantVAT, Import Tax, or Customs Duty may be payable Please check. It is the buyers responsibility to pay these chargesThe full sale value of the goods will be declared on Customs Form*Returns*Returns are ONLY accepted if the item is faulty or is not as describedItems are checked, photographed, and security marked before shippingI am confident you will find the listing is accurate Thank you for looking

Track Page Views WithAuctivas Counter

Thorens TD160 Super 2-Speed Belt-Drive Turntable in Black. Rega R200 Tonearm The TD160 Super cabinet is larger and heavier than the average. Styling is plain, with a black exterior and matt silver motorboard. The plastic lid is unusually robust and hinged so that it will stay open at any desired angle above about 40°. The motorboard is uncluttered and therefore easy to keep clean, there being just one control knob marked 33, 45 and off. The platter is massive and dynamically balanced. It rests on an inner turntable of 160 mm diameter around which is wrapped the drive belt. In very good cosmetically condition - please review attached photos. Lid with age related scratches. Nothing major. It still look very presentable. Shure MM cartridge. Record stabiliser included. Fully functional. Please review all attached photos carefully to be sure of what you’re buying. Photos are part of description. I’m happy to answer any questions you have, just drop a message before auction end. This is a used item described to the best of my ability, it may not be perfect in every way. Worldwide Shipping using eBay Global Shipping Programme only Please be advised to contact myself or eBay where appropriate to enquire about the shipping charges to the destination address for overseas purchases. eBay/PayPal Payment or Cash on Collection Once payment is received, I will leave feedback and hope you will do the same when you have received your item in good order. If you do not feel happy about any aspect of our transaction or received item, please contact me in the first instance so I can do my best to resolve any issues. If you are a person who appreciates the quality of NEAT music, please take a look at my other bargains/ items for sale too on eBay Any goods damaged in transit should be reported within 24 hours of receiving it and would request to take clear pictures of the damages. Also, in this situation please do not throw the original packing away as the courier companies request them for investigation. RETURN POLICY If you are not satisfied with your item I can offer a full refund (excluding postage and packaging costs). Items must be returned within 14 days and in the same condition as you received them, all items will be checked upon return before a refund is issued. Please contact me before returning an item so that I may have an opportunity to sort out any concerns and know why you are returning the item. Thank you

WE ARE AN AUTHORIZED REGA DEALER!PREOWNED - FULLY TESTED - BUILT BY ACOS/LUSTRE - INCLUDES COUNTERWEIGHT AND DIN CABLERB200 TonearmSpecificationsArm tube: stainless steelHeadshell: removableMounting distance: 222mmMounting hole: 25mmEffective mass: 16g

Highly regarded Rega R200 arm which has been rewired internally with Cardas 33awg Litz wire and externally with Van Damme Pro grade classic XKE silver plated oxygen free Cu and new Neutrik phono plugs. The elbow coupling into the arm base has been 3D printed. Arm complete with Rega headshell (no cartridge) counterweight, damped cue mechanism and locking arm rest. Bias belt has been replaced with a new Kevlar reinforced belt by myself - I have been selling the kits on eBay for years and have replaced more belts than I care to remember. No original packing but will be securely packed for posting. Overall condition is 9/10 - few marks but nothing significant.

Rega R200 tone arm only works well and sounds good free post to usa as requested

Looks like a NAD 533 but with Rega R200 tone arm works well and sounds good Good Sure SC35C cartridge and stylus Bargain! The arm and stylus are worth far more. New belt Thanks to all the people who advised me on the tone arm Message me for delivery options I will pack well for postage but you would have to arrange a courier at your riskas I have had bad experiences shipping such items ( yes you Parcelforce ????)

Looks like a NAD 533 but with Rega R200 tone arm works well and sounds good Good Sure SC35C cartridge and stylus Bargain! The arm and stylus are worth far more. New belt Thanks to all the people who advised me on the tone arm Message me for delivery options I will pack well for postage but you would have to arrange a courier at your riskas I have had bad experiences shipping such items ( yes you Parcelforce ????)

GENUINE LATERAL BALANCE WEIGHT for ACOS LUSTRE GST-1 AND REGA R200IN VERY GOOD CONDITION WITH SOME LIGHT MARKSU WILL GET WHAT U SEE ON THE PHOTOS ONLY

The R200 tonearm has been around for around 40 years and most (all?) suffer from the same problem of the bias belt degrading and finally snapping, which then makes bias adjustment impossible. To check your arm rotate the bias setting dial and if there is no resistance felt it is likely the belt has failed. The ultimate test is to balance the arm at zero tracking and setting bias to zero: no perceptible anti-clockwise force apparent. Then set to 2g: significant anti-clockwise force should be apparent. If you are lucky it will fail stuck at a fixed setting of 1.5-2.0g, but it is difficult to know where it is actually set. Inside the arm pillar is a miniature toothed belt which moves a magnet up and down to set the required outward force for optimum tracking. The belts are no longer supplied by Rega (if they ever were) and I couldn't find a UK supplier. I finally managed to find a USA supplier, but posting was a very high fixed price for one belt, so I bought a batch to sell on here and then again. That was a few years ago now.   The new belt as supplied is materially superior but somewhat less stiff compared to the original, which means a small spacer must be inserted in order to keep the belt taught and maintain the meshing between two gear wheels. This is vital to getting the belt to function properly. I have laser cut these to the correct profile and attached a self-adhesive backing to stick inside the arm housing. I’m not going to pretend this is a trivial 10 min fix, because it isn’t. To get access to the belt you will have to partially strip the arm pillar assembly and remove the bottom ball race, which was factory set all those years ago for optimum friction and bearing play; taking off is relatively easy, but getting it back and adjusted to optimum is not so easy. I spoke with the well-known Glaswegian tonearm expert before attempting my first repair and he told me that he is not keen on working with the R200. Anyway, I have now fixed many veteran arms for myself and others and have received nothing but positive feedback. However, I’m very hands-on and have worked in micro-systems engineering for years. If you want to have a go to restore your arm here is your chance. I have even helped a few purchasers. I will include a brief instruction sheet although there is a fair amount of advice to be found on-line. You will also need to be able to de-solder and solder the fine internal wires back to the socket connection of the phono leads.   To be clear: what you are buying is a new Kevlar reinforced miniature toothed replacement belt + self-adhesive spacer. If you are thinking of replacing the internal arm wire my advice would be to do this at the same time as belt replacement.

Vintage Rega Planar 3 Belt Drive Turntable R200 tonearm Boxed. Here is a Rega planar 3 with its original legendary Acos based R200 couple with an audio Technica MM cartridge Im selling to downsize my collection of hifi equipment. It has its box and this is a collection only auction