Sansui FR-D Turntable TONEARM COUNTERWEIGHT.

Sansui FR-D Turntable TONEARM COUNTERWEIGHT.

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

SANSUI SR-232 Tonearm Counterweight. Like New. No International Shipping. ltyelgen

SANSUI SR-232 Tonearm Counterweight. Like New. No International Shipping. ltyelgen

Anti skate weight for the tonearm of the Sansui SR 525. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Up for sale is this Vtg Sansui SR-212 Record Turntable Tonearm Headshell Cartridge Holder with signs of use and wear. Please ask questions before you bid. The buyer will pay $7.95 for packing and shipping to the lower 48 via USPS 1st class Mail. Thanks for looking!!!!

Sansui SN-101 headshell tonearm cartridge turntable Technics SH-100 clone. Sansui SN-101 dampened headshell for sale. It weights 9.8g. The shell has upgraded ($60) silver wires Sell: $44.99 Shipping is $4.40inside USA with first class mail. Combine shipping $1 each next item.Outside USA shipping is $18 with USPS firstclass mail.

Up for sale is this Vtg Sansui SR-212 Record Player Turntable Tonearm Counterweight Rear Weight with minor signs of use and wear. Please ask questions before you bid. The buyer will pay $6.95 for packing and shipping to the lower 48 via USPS 1st class Mail. Thanks for looking!!!!

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

For sale: Original Vintage Sansui P-50 Turntable Tonearm Socket Counterweight Excellent condition. Please refer to the pictures. Shipping and Handling by Airmail: (Prices in CAD $)Québec and Ontario : $15 / Other Canadian Provinces : $17.00[Deep North will be more] USA : $20International :Email me!IMPORTANT: WAIT FOR THE INVOICE FOR THE RIGHT SHIPPING COST PAYPAL AND SHIP WORLDWIDE!

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

Pre-owned, Vintage, Untested We ship out fast! Either same day or next business day after payment Monday-Friday. **Please hover over all photos to enlarge so you can get a better idea of the condition. **UNTESTED, SOLD FOR PARTS OR REPAIR** Original Sansui Turntable Tonearm, Headshell, SV-43 Cartridge & Audio Technica Stylus Shipping FedEx Thanks for looking :-) Many of the items we sell come from estates, therefore we don’t have the background knowledge of their history, age, manufacturer, etc., unless marked. While we are not experts, we do cursory research on the merchandise we sell and describe them to the best of our ability. Please ask questions prior to purchasing or bidding.Unless specified as “new,” most items are pre-owned, used and/or vintage and therefore it may show normal age wear. See all pictures and use the enlarge tool, as this will provide you with the best description of the product. You will receive the item in the photos.Seller’s policy: Purchasing or making an offer commits you to buying the item and agreeing to the following policies: Please pay within 3 days after auction ends. If item is listed as a “Buy It Now/Or Best Offer,” immediate payment is required. Immediate payments are preferred and are always appreciated! If no payment is made within 3 days of purchase, a non-payment claim will be filed.Return policy: We do not accept returns unless a listing was grossly misrepresented. If you receive an item damaged in the mail, please take and send photos of the damage and the packaging so we may file an insurance claim with our carrier. Although we don’t accept returns, please communicate any issues with us prior to leaving feedback so we can work to resolve issues. Our goal is to keep you as a happy, returning customer and we appreciate positive feedback. Location: H5

Vintage Sansui Turntable Tonearm COUNTERWEIGHT FR-Q5 & others

~Vintage~ Sansui branded Headshell for turntable Tonearm cartridge.

Original Parts ----Sansui SR-232 Tonearm Tube in used condition / dry stored for many years---with minor age related marks---cash on collection is welcomeorUk post £4.70 courier sign for----please view my other pioneer parts

~Vintage~ Sansui branded Headshell for turntable Tonearm cartridge.

Original Parts----Sansui SR-232 Counterweight in used condition / dry stored for many years---with age related marks---cash on collection is welcomeorFree Uk post courier sign for----please view my other sansui parts

Anti skate weight for the tonearm of the Sansui SR 525. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Tonearm Sansui Turntable SR-222 MK11. Tonearm in working condition but has some ISSUES -broken rest -not stay up,always after seconds going down Selling for parts or repair,maybe someone needed parts for project etc. Only UK post

Sansui FR-D35 Turntable Tonearm Silver Trim Cover OEM Part. EXCELLENT condition. Shipped with USPS First Class.

Sansui Turntable Tonearm Cartridge Mounting Screws (Ultra Light Weight Nylon) The Picture shows Exactly what you are Buying & will Receive.The Headshell - Cartridge Mounting Kits Include the Parts Listed Below.2 x M2.5x4 mm Nylon 66 Screws.2 x M2.5x6 mm Nylon 66 Screws.2 x M2.5x8 mm Nylon 66 Screws.2 x M2.5x10 mm Nylon 66 Screws.2 x M2.5x12 mm Nylon 66 Screws.2 x M2.5x15 mm Nylon 66 Screws.2 x M2.5x18 mm Nylon 66 Screws.2 x M2.5x20 mm Nylon 66 Screws.16 x M2.5 Nylon 66 Fixing Nuts.16 x Nylon Washers.They can be Use with the Following Makes Of Tonearm: SME (all Models) Linn (all Models) Thorens (all Models) Grace (all Models) Rega (all Models) Acos Lustre (all Models) Roksan (all Models) ARB (all Models) Origin Live (all Models) Inspire Hi Fi (all Models) Mission (all Models) Hadcock (all Models) Koetsu (all Models) ADC (all Models) Jelco (all Models) Naim (all Models) Goldring (all Models) Acoustic Research (all Models) Townsend (all Models) Michell (all Models) Dual (all Models) Pro-Ject (all Models) They Can Also Be Used With The Following Makes Of Turntable: Thorens (all Models) Technics (all Models) Audio Technica (all Models) Rotel (all Models) Pioneer (all Models) Sony (all Models) Toshiba (all Models) Yamaha (all Models) Sansui (all Models) Luxman (all Models) Goldring (All Modes) Dual (All Models) Denon (All Models) Hitachi (All Models) Trio (All Models) Kenwood (All Models) Acoustic Research (All Models) A&R (All Models) + Many Other Makes.These are by far the Best Choice for use with MC Moving Coil Cartridges.They can be used with almost all MM Moving Magnet Cartridges as well.Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions. Q: How Long Will I Have To Wait For My Order To Arrive ? A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)Q: Do You Provide Tracking Details ? A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.Q: My Tracking Details Do Not Work, Why ? A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.Q: Can You Send My Order To A Non Registered eBay - PayPal Address ? A: No, This Is Not Possible. PLEASE DO NOT ASK!Q: Will You Send By A Cheap Non Signed For Courier ? A: No, All Items Are Always Send Fully Signed For & Fully Trackable.Q: Will You Send Overseas ?A: We Ship To Many Countries Via eBay Global Shipping.Q: What Are The Costs To Ship To Me Overseas ?A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.

Anti skate weight for the tonearm of the Sansui SR 525. This anti skate weight is made as a close replica of the original. It is made to the correct mass value required but it my differ cosmetically to the original manufacturers weight. NOTE:- This tonearm also uses a lateral balance weight that slides on a bar and this is not that item. * Please note that this auction is for the anti skate weight and its monofilament line only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply extra lines if you feel you might need them for free on request. *

Up for sale is this Vtg Sansui SR-212 Record Turntable Tonearm Headshell Cartridge Holder with signs of use and wear. Please ask questions before you bid. The buyer will pay $7.95 for packing and shipping to the lower 48 via USPS 1st class Mail. Thanks for looking!!!!