Schiit Aegir Mono Blocks (2) - THIS IS A PAIR - EXCELLENT CONDITION
- Состояние: Б/у
- Цена: 873.68 EUR
- Статус: не продано
- Номер товара: 256144600963
- Кол-во ставок: 0
- Продавец: mjmauldin2012 (54|100.0%)
- Информация о продавце: Частное лицо
- Отправка из: Little Elm, Texas
- Доставка в: US
- Стоимость доставки: 0,0 EUR
- на eBay
-
Oписание продавца
Schiit Aegir Mono Blocks (2) - THIS IS A PAIR. I am the original owner and bought both of these from Schitt Audio. They work perfectly.Excellent condition. No smoking environment. This below is taken from the Schiit website: Continuity™: Benefits Beyond Class AAegir is our first Continuity speaker amplifier. Technically, Continuity is a way to eliminate transconductance droop outside of the Class A bias region, and extend the benefits of Class A biasing. It also solves the NPN and PNP device mismatch problem, since it uses both NPN and PNP devices on both rails. It’s still a very hot-running amp, though, with over 10W of Class A standing bias. A True All-Out DesignLike Vidar, Aegir uses an exotic current-feedback topology, as well as a 100% linear power supply (with 7 separate voltage rails and 600VA transformer) and microprocessor oversight to eliminate capacitors and DC servos in the signal path. No Class D, no switching supplies, no fans, no compromises, nothing in the signal path but music—for a three-figure price tag. Power That ScalesAegir provides 20W into 8 ohms, doubling to 40W into 4 ohms. Run mono, and you’ll see 80W into 8 ohms. Best of all, Continuity ensures you see Class-A-like performance at all these power outputs. Convenient Standby ModeOn Aegir, we’ve added a front-panel button to put the amp into Standby mode. This de-biases the output stage completely and reduces standing power consumption significantly. This keeps the rest of the amp up and running, without massive heat output. Designed and Built in CaliforniaBy “designed and built in California this is what we mean: the vast majority of the total production cost of Aegir—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture. Power Output:Stereo, 8 Ohms: 20W RMS per channel Stereo, 4 Ohms: 40W RMS per channelMono, 8 ohms: 80W RMS Frequency Response: 20Hz-20Khz, -0.1db, 3Hz-500KHz, -3dB THD: <0.01%, 20Hz-20KHz, at 20W RMS into 8 ohms IMD: <0.01%, CCIR, at 20W RMS into 8 ohms SNR: >112db, A-weighted, referenced to full output Damping Factor: >100 into 8 ohms, 20-20kHz Gain: 12 (22dB) Input Sensitivity: AKA Rated Output (Vrms)/Rated Gain. Or, 14.3/12. You do the math. Input Impedance: 22k ohms SE, 44k ohms balanced Crosstalk: >95dB, 20-20kHz Inputs: L/R RCA jacks for stereo input, single XLR for mono input Topology: Fully complementary, all-BJT, current feedback, no coupling capacitors or DC servos with Continuity™ constant transconductance output stage Oversight: microprocessor-controlled monitoring and management of critical operational points, including DC offset, with standby mode and relay shut-down for overcurrent, thermal, and other faults Power Supply: 600VA transformer with dual mono main rails, plus boosted, regulated supply to input, voltage gain and driver stages, plus separate, isolated and regulated rails for microprocessor management. Power Consumption: 450W maximum Size: 9” x 13” x 3.875” Weight: 22 lbs
Живой Поиск