This is a reprint of a Review from 1984! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

*************** This item is being relisted as the high bidder flaked out... Please, only bid if you intend to follow through with the sale! ***************** Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Follow us| Sign up for our newsletter Mark Levinson ML-9 - Audiophile Quality Solid State Stereo Power Amplifier For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson ML-9 Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintainedCosmetic Notes:Faceplate shows faint spots of discoloration. Very good overall physical condition. Please see all high resolution photographs below.Functional Notes:Functions as intended and sounds great.Voltage:105-125VSerial #:725Original Box:NoManual:YesRemote:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International)Shipping Weight (lbs):65lbs (24x20x20) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-3 High End Vintage Endverstärker Inklusive Recab,Version mit einstellbarem Dämpfungsfaktor Kein Originalverpackung vorhanden Technisch EinwandfreiOptisch , Siehe Fotos ------------------------------------ ------------------------------------Fragen zum Klang Um Ihre und unsere Zeit nicht unnütz zu vergeuden, beantworten wir keine Fragen zum Klang, z.B. wie das Gerät sich mit dem Lautsprecher x und den Kabeln y verhält. Noch Fragen?Bitte klicken Sie rechts oben im Kasten Angaben zum Verkäufer auf den Punkt Verkäufer kontaktieren!----------------------------------Please, it is not fair to ask what is the lowest price,if hes going to buy the items we sell, then send us the proposal via eBay and not via news,if we believe that the offer sie affordable accept it !!!thank you,---------------------------------------------------Bitte, es ist nicht fair zu fragen, was ist der niedrigste Preis,wenn sie vor haben aus unsere Artikel sortiment ernsthaft zu kaufen , dann senden Sie uns den Preisvorschlag über eBay und nicht über Nachrichten,wenn wir glauben dass ihre Preisvorschlag interessant ist, dann akzeptieren wir es !!!danke. -----------------------Hallo, eine Rückgabe ist kein problem,zu beachten ist, die Geräte soll in der gleiche Zustand sein wie sie erhalen haden, ohne Technische Problemen!!!ohne Kratzer oder sonstigen Gebrauchsspuren!!!der Verpackung soll der Original und kein Neutral sein!!!die Versandkosten ( Versand und Rückversand) trägt der Käufer!!!bei weiteren Fragen , stehen wir gerne zu Verfühgung. die Rückgabe geht an, W&W AudioDe Reulver 977544RT EnschedeNL------------------------------------------Wir geben drei Monaten Garantie für unsere Gebrauchte Geräte bei Neugeräte geben wir die Volle Garantie Erfolgt der Verkauf in Kommission für eine Privatperson ist weder die Mehrwertsteuer ausweisbar noch eine Gewährleistung gegeben ----------------------------------------- ------------------------------------------------------Kaufabwicklung: Die Zahlung sollte innerhalb 4 Werktage abgeschlossen sein. Oder Käufer und Verkäufer haben sich anders geeinigt, so können Sie zum Beispiel den Artikel Kaufen, durch eine Anzahlung sichern und zu einem späteren Zeitpunkt zahlen. (Diesbezüglich bitte im Vorfeld zu klären!)------------------------------------------------ Ein Hinweis noch zum mitgelieferten Zubehör: Auch wenn im serienmäßigen Lieferumfang eventuell mehr Zubehör enthalten sein sollte wird lediglich das mitgeliefert was unter Mitgeliefertes Zubehör auch aufgeführt ist International bidders please ask the shipping price to your country before placing a bid! Wir bieten eventuell auch Inzahlungnahme/Tausch von/mit anderen Geräten an. Eine Finanzierung ist leider nicht. Noch irgendwelche Fragen? Kein Problem, schickt uns eine Mail und wir werden diese selbstverständlich so schnell wie möglich beantworten. Bevor sie jedoch die Fragen stellen lesen sie sich bitte zuerst den Beschreibungstext sorgfältig durch, viele Fragen beantworten sich dann erfahrungsgemäß von selbst. Der Verkauf erfolgt differenzbesteuert gem. §25a UStG, daher kann die Umsatzsteuer auf der Rechnung nicht separat ausgewiesen werden. ---------------------------------------------

Mark LevinsonML-3 Amplificatore di potenza vintage di fascia alta Cabina inclusa,Versione con fattore di smorzamento regolabile Nessuna confezione originale disponibile Tecnicamente impeccabileottico , Vedi le foto ------------------------------------- -------------------------------------domande sul suono Per non far perdere il vostro e il nostro tempo, non rispondiamo a nessuna domanda sul suono, ad esempio come si comporta il dispositivo con laltoparlante x e i cavi y. Ancora domande?Fai clic su Contatta il venditore nella casella Informazioni sul venditore in alto a destra!----------------------------------Per favore, non è giusto chiedere qual è il prezzo più basso,se intende acquistare gli articoli che vendiamo, inviateci la proposta tramite eBay e non tramite news,se riteniamo che lofferta sia conveniente la accetti!!!Grazie,-------------------------------------------------- -Per favore, non è giusto chiedere qual è il prezzo più basso,Se sei seriamente intenzionato ad acquistare dalla nostra gamma di articoli, inviaci la proposta di prezzo tramite eBay e non tramite messaggi,se crediamo che il tuo suggerimento sul prezzo è interessante allora lo accettiamo!!!Grazie. -----------------------Ciao, un reso non è un problema,dovrebbe essere notato i dispositivi devono essere nelle stesse condizioni in cui sono stati ricevuti, senza problemi tecnici!!!senza graffi o altri segni di usura!!!La confezione deve essere quella originale e non neutra!!!Le spese di spedizione (spedizione e spedizione di ritorno) sono a carico dellacquirente!!!Se hai ulteriori domande, saremo felici di aiutarti. il ritorno va a, W&W AudioDe Reulver 977544RT EnschedePaesi Bassi-----------------------------------Diamo una garanzia di tre mesi per i nostri dispositivi usati Diamo una garanzia completa per i nuovi dispositivi Se la vendita viene effettuata su commissione per un privato, lIVA non può essere dichiarata e non viene fornita alcuna garanzia -------------------------------------------------- ---- -------------------------------------------------- ----Processo di acquisto: Il pagamento dovrebbe essere completato entro 4 giorni lavorativi. Oppure lacquirente e il venditore hanno concordato diversamente, ad esempio puoi acquistare loggetto, assicurarlo con un deposito e ad a paga dopo. (A questo proposito, per favore Da chiarire in anticipo!)------------------------------------------------ Una nota sugli accessori inclusi: Anche se nella fornitura standard possono essere inclusi più accessori, è incluso solo ciò che è elencato sotto Accessori inclusi. Gli offerenti internazionali si prega di chiedere il prezzo di spedizione nel proprio paese Prima facendo unofferta! Potremmo anche offrire permute/scambi da/con altri dispositivi. Purtroppo non cè alcun finanziamento. Altre domande? Nessun problema, inviaci une-mail e ovviamente ti risponderemo il più rapidamente possibile. Tuttavia, prima di porre domande, leggere attentamente il testo descrittivo; lesperienza ha dimostrato che molte domande si rispondono da sole. La vendita è soggetta a tassazione differenziale ai sensi dellart. §25a UStG, pertanto limposta sulle vendite può essere inclusa nella fattura non essere mostrati separatamente. ---------------------------------------------

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

This listing includes the preamplifier, power supply, oak case, and all of the associated cables and adapters shown in the photos. (Just the modules from these units are selling for over $500 each, so thats well over $2k worth of parts.)All functions work, including the phono stage and 5 modules shown in the photos. This unit uses an unusual interface and there are cables included in this listing that will allow mating it with normal RCA type audio gear. The original user manual is also included.

*************** This item is being relisted as the high bidder flaked out... Please, only bid if you intend to follow through with the sale! ***************** Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Follow us| Sign up for our newsletter Mark Levinson ML-11 - Audiophile Quality Solid State Stereo Power Amplifier SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson ML-11 Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsFunctional Notes:Makes a quiet popping sound through speakers every 3-4 seconds. Power switch light flickers when on. Problem unknown. SOLD AS-ISVoltage:105-125V 50/60HzSerial #:204Original Box:NoManual:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International) Shipping Weight (lbs):30 (24x20x12) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Follow us| Sign up for our newsletter Mark Levinson ML-11 - Audiophile Quality Solid State Stereo Power Amplifier SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson ML-11 Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsFunctional Notes:Makes a quiet popping sound through speakers every 3-4 seconds. Power switch light flickers when on. Problem unknown. SOLD AS-ISVoltage:105-125V 50/60HzSerial #:204Original Box:NoManual:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International) Shipping Weight (lbs):30 (24x20x12) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

DescriptionWe have received a rare ML-1 with a skeleton panel design! It features an exceptional Spectrol volume control and follows in the footsteps of the JC-2, serving as the foundation for Mark Levinson preamps. The phono module is in MM specification, similar to the A3. Its captivating sound combines delicacy and powerful sharpness! It performs admirably across a wide range of music genres, from jazz to rock. The exterior has minor scratches on the power unit. The power supply is the genuine 100V version. Serial number 3208/2367 (Yukishi Fujisawa).Key specifications:- 6 line inputs- 2 phono inputs- 2 preamp outputs- Dimensions: Main Unit W483×H51×D156mm, 2.5kg; Power Unit (PLS-153L) W101×H101×D256mm, 2.2kg Maintenance history:- Serviced (There was a short circuit in the internal wiring of the Fischer plug. Wiring inside the plug was corrected, the power switch was replaced with the genuine breaker switch, specifications were checked, various operations were inspected, and a running test was performed.) Accessories: Power cord, connecting cables, 4x RCA pins, wooden cabinet included.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Mark Levinson ML-10A Stereo Preamplifier with MM/MC Phono ~ FREE SHIPPING Click images to enlarge Description Hello.  Up for consideration is a Mark Levinson ML-10A Stereo Preamplifier with MM/MC Phono ~ FREE SHIPPING Still sounds amazing; phono works well.  Please look at all of the photos as they are a part of the description.   FREE SHIPPING for the lower 48 states! View My Other Items For Sale Get images that make Supersized seem small.Showcase your items with Auctivas Listing Templates! THE simple solution for eBay sellers. Track Page Views WithAuctivas Counter

Mark Levinson Ml-2 StromverstärkerDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der ausliefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbiete Receiver Combo Features NA Number of Inputs NA Year Manufactured NA Audio Outputs NA Country/Region of Manufacture NA Unit Quantity NA Supported Modes NA Power NA Type NA Brand Mark Levinson Audio Inputs NA Compatible Product NA California Prop 65 Warning NA Number of Channels NA Number of Outputs NA Unit Type NA Country Japan UPC NA Manufacturer Warranty NA Model NA Surround Sound Formats NA Amplifier Class NA Features NA Color NA MPN NA

PaymentRest assured that our store offers a variety of payment methods.Please pay within 5 days after auction is finished. About UsWe are located in Japan.For electrical products check the manufacturer and product and convert to the voltage of each country.We plan to ship by FedEx or DHL.Please contact us as the shipping fee can be changed in some cases. Its our pleasure to make you happy by proposing our recommend item.If you have any questions or request about items please feel free to ask us. International Buyers - Please Note:-Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.-Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying.-These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.-We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior.>

Mark Levinson ML-1 Solid-State Modular Stereo Preamplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny knicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state preamp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid state offerings at that time. The sound quality is rivaled today only by new much more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!!This ML-1 Preamp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cables. Either already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.