Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Wenn Sie von dem US Marktplatz bestellen, können für die Pakete Steuern und Zollgebühren anfallen, die der Käufer später tragen muss.Marke Levinson ML-3 Verstärker Review, 4 Seiten, 1984, InfoDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns. Dies ist ein Nachdruck einer Rezension aus dem Jahr 1984! Sehr selten und schwer zu finden! Ein Stück Audiogeschichte! Ich habe TAUSENDE Weitere Anzeigen und Bewertungen in meinem eBay-Shop. E-Mail mit allen Fragen, DANKE! -Suchen Sie links in meiner Store-Suchleiste nach einer Marke, die Ihnen gefällt. Ich habe fast jede beliebte Audiomarke!      -Jede Seite ist 8,5 x 11 groß - Wie immer ist Ihre Zufriedenheit bei Electronics Archives GARANTIERT! Wenn Sie mit einem Kauf unzufrieden sind, senden Sie mir eine E-Mail und ich werde Ihnen eine Lösung oder eine Rückerstattung besorgen! - Schicken Sie mir bei Fragen eine E-Mail, ich stelle JEDEN TAG 10–20 neue Anzeigen und Broschüren auf meine Website!     DANKE SCHÖN!   Angetrieben von eBay Turbo ListerDas kostenlose Listing-Tool. Listen Sie Ihre Artikel schnell und einfach auf und verwalten Sie Ihre aktiven Artikel.Dies ist ein Nachdruck einer Rezension aus dem Jahr 1984! Sehr selten und schwer zu finden! Ein Stück Audiogeschichte! Ich habe TAUSENDE Weitere Anzeigen und Bewertungen in meinem eBay-Shop. E-Mail mit allen Fragen, DANKE! -Suchen Sie links in meiner Store-Suchleiste nach einer Marke, die Ihnen gefällt. Ich habe fast jede beliebte Audiomarke!      - Wie immer ist Ihre Zufriedenheit bei Electronics Archives GARANTIERT! Wenn Sie mit einem Kauf unzufrieden sind, senden Sie mir eine E-Mail und ich werde Ihnen eine Lösung oder eine Rückerstattung besorgen! - Schicken Sie mir bei Fragen eine E-Mail, ich stelle JEDEN TAG 10–20 neue Anzeigen und Broschüren auf meine Website! Angetrieben von eBay Turbo Lister Das kostenlose Listing-Tool. Listen Sie Ihre Artikel schnell und einfach auf und verwaltDies ist ein Nachdruck einer Rezension aus dem Jahr 1984! Sehr selten und schwer zu finden! Ein Stück Audiogeschichte! Ich habe TAUSENDE Weitere Anzeigen und Bewertungen in meinem eBay-Shop. E-Mail mit allen Fragen, DANKE! -Suchen Sie links in meiner Store-Suchleiste nach einer Marke, die Ihnen gefällt. Ich habe fast jede beliebte Audiomarke!      - Wie immer ist Ihre Zufriedenheit bei Electronics Archives GARANTIERT! Wenn Sie mit einem Kauf unzufrieden sind, senden Sie mir eine E-Mail und ich werde Ihnen eine Lösung oder eine Rückerstattung besorgen! - Schicken Sie mir bei Fragen eine E-Mail, ich stelle JEDEN TAG 10–20 neue Anzeigen und Broschüren auf meine Website! Angetrieben von eBay Turbo Lister Das kostenlose Listing-Tool. Listen Sie Ihre Artikel schnell und einfach auf und verwalt Brand Mark Levinson Type Paper Compatible Brand Mark Levinson

This is a reprint of a Review from 1984! Very rare and hard to find! A piece of Audio History! I have THOUSANDS more Ads and Reviews on my Ebay Store. Email with ANY questions, THANKS! -Search for any brand you like on the left side in my Store Search bar. I have almost every popular Audio brand! -Each Page is 8.5 by 11 -Shipping is $3 in the USA and $6 ANYWHERE else, I ship WORLDWIDE! Each additional item is only $1 more to ship! -As always, your satisfaction is GUARANTEED at Electronics Archives! If you are unhappy with any purchase, email and I will get you a resolution or a refund! -Email me with any questions, I put 10-20 new Ads and Brochures on my site EVERY DAY! THANK YOU! Powered by eBay Turbo ListerThe free listing tool. List your items fast and easy and manage your active items.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

*************** This item is being relisted as the high bidder flaked out... Please, only bid if you intend to follow through with the sale! ***************** Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi & Records, Ausgabe Januar 2001: Bericht über den Vollverstärker Mark Levinson ML 383, Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 4 Format, size: 26 x 19,5 cm Gewicht, weight: 0,011 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

This listing includes the preamplifier, power supply, oak case, and all of the associated cables and adapters shown in the photos. (Just the modules from these units are selling for over $500 each, so thats well over $2k worth of parts.)All functions work, including the phono stage and 5 modules shown in the photos. This unit uses an unusual interface and there are cables included in this listing that will allow mating it with normal RCA type audio gear. The original user manual is also included.

*************** This item is being relisted as the high bidder flaked out... Please, only bid if you intend to follow through with the sale! ***************** Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Posting this piece of gear for a friend. There will be more high-end audio items to follow... You are bidding on an excellent original condition example of the Mark Levinson ML-1 Stereo Preamplifier, with the rare optional moving coil phono module. Also included is the PLS-150 external power supply. I believe this is a second owner piece. It has been with the current owner since the early 1980s. I spent time listening to it in those days, so I can verify that fact. They moved on to other gear, and this unit has been stored for some time. I had it powered up for at least a week, listening to it periodically to verify operation, and heard no issues. There are a couple of switches that could use a bit of a clean. NOTE: It appears that Phono 2 was wired directly to the input of the MC phono module. This was done in the 1980s or earlier. Probably done to reduce signal path, and avoid the phono selector switch. Not sure if this was a factory or user mod. Could be reversed easily if desired. Workmanship quality is good. Just an FYI. Also included is a selection of interconnect cables that have had RCA connectors added to one end, so you can connect all of your current gear to the ML-1 without having to worry about adapters. There is also a short handmade RCA-Camac adapter as well. - (2 pair) 6 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, Mark Levinson Audio Systems LTD. HFC Swiss Made cables- (1 pair) 3 foot Camac to RCA, silver coax?- (1 pair) 3 foot Camac to RCA, Monster Interlink- (1 pair) 3 RCA to Camac adapter Additionally, I will include a printed copy of the owners manual and schematic diagram. PLEASE EMAIL WITH ANY QUESTIONS BEFORE BIDDDING. International bidders will pay any shipping costs, and fees/duties relevant to their country. Thanks for looking!!

Follow us| Sign up for our newsletter Mark Levinson ML-11 - Audiophile Quality Solid State Stereo Power Amplifier SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson ML-11 Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsFunctional Notes:Makes a quiet popping sound through speakers every 3-4 seconds. Power switch light flickers when on. Problem unknown. SOLD AS-ISVoltage:105-125V 50/60HzSerial #:204Original Box:NoManual:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International) Shipping Weight (lbs):30 (24x20x12) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi & Records, Ausgabe Januar 2001: Bericht über den Vollverstärker Mark Levinson ML 383, Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 4 Format, size: 26 x 19,5 cm Gewicht, weight: 0,011 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

Follow us| Sign up for our newsletter Mark Levinson ML-11 - Audiophile Quality Solid State Stereo Power Amplifier SOLD AS-ISLIST OF DEFECTS IS NOT EXHAUSTIVE - THERE MAY BE ADDITIONAL DEFECTSNO RETURNS UNDER ANY CIRCUMSTANCESAll items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available Mark Levinson ML-11 Details & Testing Notes Cosmetic Condition:8/10: Very Good - flawless front face, other minor imperfectionsFunctional Notes:Makes a quiet popping sound through speakers every 3-4 seconds. Power switch light flickers when on. Problem unknown. SOLD AS-ISVoltage:105-125V 50/60HzSerial #:204Original Box:NoManual:NoPower Cord:YesShipping Method:FedEx Ground (Domestic) / USPS Priority, Ebay Standard Delivery (International) Shipping Weight (lbs):30 (24x20x12) High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1516 (GS 9.3 (1516))

hat bis vor dem Einmotten funktioniert . Das Kabel zwischen Netzteil und ML 1 ist beim Umzug verloren gegangen. Läßt sich aber wahrscheinlich noch anfertigen , die Stecker sind noch erhältlich.

Mark Levinson ML-1 Solid-State Modular Stereo Pre-amplifier, with original matching PLS-150 Power Supply - Vintage Audiophile Quality HiFi at its finest! Serial #3320 / #1861 Just Restored and Fully Tested by Morts Stereo in Levittown, PA (a renowned High-End Audio & Video repair firm) with a warranty. See sticker in photo. Ships in factory original box and packing. More inputs and outputs than you will ever need. Also comes with 1 pr 6 cables, 1 pr 5 cables, 5 pr 3 cables, 1 pr 18 cables and 4 prs RCA to Lemo plug gold plated adapters. Some tiny nicks on edge of face plate. See photos. The ML-1 is completely black anodized with white lacquer-filled engravings, it has a timeless appearance due to a slimline visual footprint and symmetrical control layout. When it was introduced in 1977 it was considered to be the best solid state pre-amp available on the market. Until then it was thought that this sound quality was only possible with tubes. The sound is clean and precise, but at the same time musical and smooth. It clearly outperformed all competing solid-state offerings at that time. The sound quality is rivaled today only by newer and more expensive gear. The phono section is still one of the smoothest regardless of cost. You will not be disappointed with this items performance. PLEASE NOTE: I have recently added new photos of the internal array of the components (all ML units) so that you can see under the hood. This item is for U.S. based buyers only. On Sep-17-23 at 11:37:46 PDT, seller added the following information: ADDED BONUS FEATURE WORTH MORE THAN A THOUSAND DOLLARS!!! This ML-1 Pre-amp, like most of them, requires that it be connected to input/output devices using Lemo-fitted cables. Lemo cables are generally not available in any stores and must be custom ordered from Lemo or one of their distributors (who also fabricate them on a custom basis). These connector cables sell for at least $100 per cable (need L & R for stereo) so $200 for each device to be connected to the pre-amp. Dont be fooled into buying an ML-1 or other high end component that requires Lemo cable unless you already have them or have them ready to order. Otherwise you are buying a nice black brick with no use at all.

DescriptionWe have received a rare ML-1 with a skeleton panel design! It features an exceptional Spectrol volume control and follows in the footsteps of the JC-2, serving as the foundation for Mark Levinson preamps. The phono module is in MM specification, similar to the A3. Its captivating sound combines delicacy and powerful sharpness! It performs admirably across a wide range of music genres, from jazz to rock. The exterior has minor scratches on the power unit. The power supply is the genuine 100V version. Serial number 3208/2367 (Yukishi Fujisawa).Key specifications:- 6 line inputs- 2 phono inputs- 2 preamp outputs- Dimensions: Main Unit W483×H51×D156mm, 2.5kg; Power Unit (PLS-153L) W101×H101×D256mm, 2.2kg Maintenance history:- Serviced (There was a short circuit in the internal wiring of the Fischer plug. Wiring inside the plug was corrected, the power switch was replaced with the genuine breaker switch, specifications were checked, various operations were inspected, and a running test was performed.) Accessories: Power cord, connecting cables, 4x RCA pins, wooden cabinet included.ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

hat bis vor dem Einmotten funktioniert . Das Kabel zwischen Netzteil und ML 1 ist beim Umzug verloren gegangen. Läßt sich aber wahrscheinlich noch anfertigen , die Stecker sind noch erhältlich.