I am a B&W, Bowers & Wilkins Hi-Fi Audio Consultant for over 40-years. This Tweeter Diaphragm was accidently Pushed I,, then professionally pushed back.What you see in the photos is what you will receive. It is 100% in working order. No Issues.Has a slight wrinkle impression on the dome, does not effect sound. Bowers & Wilkins NAUTILUS Tweeter ZZ22943 for:B&W CM1 Bookshelf SpeakersB&W CM7 Tower SpeakersB&W CM8 Tower SpeakersB&W CDS3 Wall SpeakersB&W DS3 Wall Speakers Shipping & Handling, and Conditions: * Ships only to the 48-states. * No International Sales. * Pay with PayPal Only, must have a Confirmed/ Verified shipping address with PayPal. * Cost of Shipping: $10 ( to the 48-states). * All sales are final, No Refunds.

The listing is for a pair of matching genuine B&W stands. Please note they are in quite poor condition. They have many scuffs and also missing pretty much all the screws. The remaining screws are rusted and seized. I’m not 100% sure, but I think they were removed from DM7 MKII speakers, or from DM2 MKII speakers. Anyways the distance between the screw holes centres is 12cm. Please measure your speaker’s holes at the bottoms. The stands are 19.5cm tall. I’m sure you can use them with any speakers if you happy to drill the holes in the bottoms of your speakers. The stands are designed to hold some heavy speakers steady. Please inspect the photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They will be packed with extra care for safe delivery ti anywhere in the world. Please let me know if you need any other B&W genuine part. We might be able to get them for you.

The listing is for a single B&W CM9 S2 Front Grille Dark Grey. I could have more of them. Please ask. The grille is in a pristine condition with one tiny mark at the top of grille. No any cracks/scratches/holes. I will pack it extremely carefully and dispatch by Express Delivery Service. I can also arrange door to door courier if preferred (subject to availability).

The listing is for just one plinth. This is not a pair! I have multiple quantities if needed. This is a genuine plinth which is used in B&W CM9 S2 speakers. It is in a great condition with some marks on the corners. Please inspect photos. Comes without screws. Please ask if you looking for any other B&W genuine part. I will try to help you.

The listing is for just one plinth. This is not a pair! I have multiple quantities if needed. This is a genuine plinth which is used in B&W CM9 S2 speakers. It is in a great condition with some marks on the corners. Please inspect photos. Comes without screws. Please ask if you looking for any other B&W genuine part. I will try to help you.

Zustand: Neuwertig, nur zum Probehören ausgepackt. Inkl. Originalverpackung und Abdeckung bzw. Frontblende, aus tierfreiem Nichtraucherhaushalt.Ursprüngliches Kaufdatum: August/September 2022 von einem autorisierten Fachhändler aus Deutschland. Die Restgarantie beträgt somit noch über 4 Jahre.Insgesamt stehen 4 Stück zum Verkauf. Der Preis bezieht sich pro Stück. Der Neupreis liegt bei 1999 Euro. Es handelt sich hierbei um die aktuelle Einbauserie in schwarz und nicht um den Vorgänger (blaue Chassis).Versicherter Versand (Standard) innerhalb Deutschlands und der EU (ohne Inseln). Eine Abholung ist nach vorheriger Terminabsprache ebenfalls möglich.Privatverkauf, ohne Rücknahme, Gewährleistung und jeglicher Haftung.

1x B&W CCM817 End 2-Way In Ceiling Speaker (Painted) i855.

( See Additional Pictures, Below this eBay Listing ) am a B&W, Bowers & Wilkins Hi-Fi Audio Consultant for over 40-years. What you see in the pictures is what you will receive. What you will receive:Bowers & Wilkins NAUTILUS, HF Motor System, Tweeter Diaphragm with 1 Alum Dome.For B&W Speakers: CM1, CM7, CM8, DS3, CDS3 Your Box will be Labeled: ZZ22943, but is compatible with all of the speakers below: ( manufactured by B&W: Tues, 22nd/ Nov/ 2022 ) B&W Speakers Original Part #: B&W CM1 ZZ22943B&W CM7 ZZ22943B&W CM8 ZZ22943B&W DS3 ZZ22943B&W CDS3 ZZ22943 Shipping & Handling, and Conditions: * Ships only to the 48-states. * No International Sales. * Pay with PayPal Only, must have a Confirmed/ Verified shipping address with PayPal. * Cost of Shipping: 10.00 ( to the 48-states). * All sales are final, No Refunds. Exclude shipping locationsExclude specific locations (regions, countries, PO boxes) that you dont want to ship to. To save time and list faster, go to My eBay Site Preferences and select the specific locations you want to exclude on allyour listings. Learn moreExcluded locations:Alaska/Hawaii, US Protectorates, APO/FPO, Africa, Asia, Central America and Caribbean, Europe, Middle East, Oceania, Southeast Asia, South America, PO Box

Selling 1 of &W Bowers Wilkins Foam Plug Bung for 702 s2, 804 D3, CM10 Speaker

Bowers & Wilkins CM7 HiFi Foorstanding Speakers - 150 W In good working order. Two deep scratches on the side of one cabinet and some other small scratches here and there. They look good otherwise. The tweeter domes have been replaced -see pictures- The CM7 is a superbly accurate and revealing wide-bandwidth speaker system. Like its CM siblings, the CM7s great strength is stereo music reproduction. A high technology, genuine three-way driver line-up, compromising a KevlarÆ/paper cone bass unit, KevlarÆ cone FST midrange unit and Nautilus tube-loaded aluminium dome tweeter. These endow the CM7 with an ability to portray musical scale from a whispered lyric to an orchestral crescendo without distortion or compression. The ear-tuned, low-order crossover circuits, made possible by the remarkably wide bandwidth of the CM7 drivers, ensure that music is portrayed as a seamless, cohesive whole. Flowport technology to minimise turbulence, and a bass driver featuring magnet system technology that reduces distortion, mean that CM7 bass is extended, fast and tuneful. Specifications System type3-wayEnclosure typeBass-reflexFrequency response ± 3dB62 - 22000 HzNominal impedance8 OhmAmplifier Requirements30 - 150 WSensitivity (2.83V/1m)88 dBTweeter25 mm (1 in.) aluminium domeMidrange130 mm (5 in.) woven Kevlar coneWoofer165 mm (6.5 in.) paper/Kevlar coneDimensions (H x W x D)910 x 200 x 280 mm / 35.83 x 7.87 x 11.02 in.Weight20 kg / 44 lbs.

Selling 1 of &W Bowers Wilkins Foam Plug Bung for 702 s2, 804 D3, CM10 Speaker

The listing is for a pair of matching plinths in Black colour. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. These are genuine plinths which are used in all B&W CM9 speakers. They are in a very good condition with a few insignificant chips/scratches. Please inspect photos. Each plinth is 37x32cm and ~3.5cm thick. The distance between front and rear hole is 23cm, but between side holes is 15cm.

Selling 1 of &W Bowers Wilkins Foam Plug Bung for 702 s2, 804 D3, CM10 Speaker

The listing is for a pair of matching grilles. I can sell 1 piece for half of the listed price plus postage. The grilles are brand new, never opened. Grey colour. These are magnetic snap-on grilles to be used with CM8 and 704 S2 speakers. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. Please let me know if you need any other B&W genuine part. I might be able to get them for you.

This is a brand new in box Bowers & Wilkins CCM7.3 S2 Speaker.

Bowers Wilkins B&W FS-CM S2 Speaker Stands 606 607 700 705. Brand new in original packaging. One has been assembled to get the photos, then taken apart carefully and placed back in the packaging. Speaker(s) shown is in a separate listing and not included in the sale (Kef q150). Superb quality, high end speaker stands. Open to offers I G @ dogstorecowboy

Selling 1 of &W Bowers Wilkins Foam Plug Bung for 702 s2, 804 D3, CM10 Speaker

Bowers Wilkins CCM7.3 Ceiling Speaker (Open box). Item in very good condition, never mounted. I was waiting for a second speaker like this one, but kept seeing the new S2 or in pairs, never a single one. If you need one, get this one at a great price.

The listing is for a pair of matching grilles. I can sell 1 piece too for half of the listed price plus postage. The grilles came as a supplied accessory with my brand new B&W 703 S2 White speakers. I put them on once and decided to use without grilles so the grilles are brand new without any signs of dust on them because they were out of their bag only for 5 minutes of their life. These are magnetic grilles. They just snap on the speaker.

The listing is for a pair of matching genuine B&W stands. Please note they are in quite poor condition. They have many scuffs and also missing pretty much all the screws. The remaining screws are rusted and seized. I’m not 100% sure, but I think they were removed from DM7 MKII speakers, or from DM2 MKII speakers. Anyways the distance between the screw holes centres is 12cm. Please measure your speaker’s holes at the bottoms. The stands are 19.5cm tall. I’m sure you can use them with any speakers if you happy to drill the holes in the bottoms of your speakers. The stands are designed to hold some heavy speakers steady. Please inspect the photos. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. They will be packed with extra care for safe delivery ti anywhere in the world. Please let me know if you need any other B&W genuine part. We might be able to get them for you.

This is a brand new in box Bowers & Wilkins CCM7.3 S2 Speaker.

1x B&W CCM817 End 2-Way In Ceiling Speaker (Painted) i855.

This is for a pair of B&W CM7 in fair to good shape. There are some scuffs on the speakers. Tweeters are brand new. Let me know if you have any questions. These will ship in their original boxes.

Selling 1 of &W Bowers Wilkins Foam Plug Bung for 702 s2, 804 D3, CM10 Speaker