Sonance Sonamp 260x3 Stereo 120W Power Amp The Sonamp 260x3 is a high-cur-rent, 60-watt-per-channel stereo amplifier with a number of features that make it well suited for custom installations. It is designed to drive difficult loads, particularly the low impedances presented by multiple parallel-connected remote speakers. For convenience in operating multizone systems, the 260x3 has pushbuttons on its front panel for individual activation of its three pairs of speaker outputs. And the stereo line-input jacks on the rear apron are paralleled with a second pair for linking (“daisy-chaining”) additional amplifiers. The Sonamp 260x3 is designed to drive 2-ohm loads without overheating or distortion (three paralleled 8-ohm speakers represent a load of 2.7 ohms). Its discrete output transistors are mounted on heat sinks, convection-cooled by air entering holes in the bottom plate and exiting through holes in the top cover. The power supply uses a heavy toroidal transformer with 30,000 microfarads (?F) of filter capacitance. Several protection circuits and a relay safeguard the amplifier against overload, overheating, or output short circuits. The AC-line fuse on the rear apron is readily accessible to the user. The Sonamp 260x3, finished in black, measures a compact 16-3/4 inches wide, 12-1/2 inches deep, and 3-1/2 inches high. It weighs about 16-3/4 pounds. In addition to the pushbutton power switch, the front panel has three speaker-selector buttons, two status-indicator lights, and individual channel-level controls that can be adjusted with a screwdriver through small holes in the panel. The red power LED (marked A.C. ON) shows that the amplifier is plugged into a live outlet but not necessarily that it is turned on. The green LED (marked ACTIVE) indicates that the amplifier is switched on and operating. A somewhat unusual (and useful) feature of the 260x3 is its Auto-On mode. If the small auto-on slide switch on the rear apron is set to on and the red power lamp is lit, the amplifier will turn on automatically within 1.5 seconds after a signal reaches its input connectors, lighting the green LED. About 2 minutes after all input signals are removed, the amplifier automatically shuts down and returns to its stand-by mode. The Auto-On feature is particularly useful in multiroom installations, in which an amplifier may be located at some distance from the control center and signal source, since it eliminates the need for a remote power-switching system. But it is also handy in a singleroom installation, especially when the control unit doesn’t have enough switched outlets to handle the rest of the system. The Sonamp 260x3 is rated for outputs of 60, 100, and 125 watts per channel into 8, 4, and 2 ohms, respectively, from 20 to 20,000 Hz at respective distortion levels of 0.05, 0.1, and 0.2 percent. The respective dynamic powers into those impedances are given as 85, 120, and 140 watts per channel. A-weighted signal-to-noise ratio (S/N) is 100 dB referred to rated output. Input sensitivity for rated output is 0.625 volt at maximum gain. Prior owner was a meticulous hi fi enthusiast

Sonance 2 Channel AmplifierUNIT ONLY, NO any other accessories included

Sonance Sonamp 260 Stereo Clean Power Amplifier - Tested and Working!!. Good shape and works as it should Look at photos for condition Any questions please ask Check out my store for similar items RACK 3 level 3

Sonance Sonamp 260 X3 Stereo Power Amplifier TESTED. Shipped UPS Ground. Item has been tested works great. Does have some lights scratches on edge overall great condition. Please see photos as they are part of the description Will be shipped safely with care Add me to your favorites!! My goal is to get 5???? positive feedback if you ever do encounter a problem please give me a chance to correct it before you leave feedback have a great day! THANK YOU WE APPRECIATE YOUR BUSINESS

Sonance Sonamp 260 Stereo 2 CH 120W Power Amplifier-Parts Only My Dad had this Sonance Sonamp 260 Power Amplifier in his home theater before he replaced everything. I thought it was working, but when I plugged it in to test the power, I could not get the AC Power light to come on so I am not sure if its working or not.Please keep in mind this listing is for the item As-Is and there are no returns. If you know these products I am sure you could get this working again but thats beyond my skill set so I am listing it here as I have no idea if it still works or not!

Sonance Sonamp 260 MKII Amplifier Amp 2 Channel 60w - TESTED - WORKS - Does not include the remote, manual or any original packaging. Unit shows some wear and scratches, but overall is in good cosmetic condition. The face is clean with a couple scuff marks, all buttons clean and work as intended and all of the illumination works. Model #: Sonamp 260 MKIISerial #: 9189202310059 Electronics Disclaimer: All electronics are marked with tamper proof security seals and serial numbers are recorded to prevent fraud. We strive to take excellent pictures and describe items as thoroughly and accurately as possible, but please dont hesitate to ask any questions that you may have. Thanks for looking! SKU#: EB-11951

- Sonance Sonamp 260 X 3 - First, can I just point out that HUGE toroidal transformer??! This is a great amp with plenty of power of use as an outdoor speaker amp, something to power a few pairs of ceiling speakers in your house or even as a stronger amp for your front channels running off a cheaper receiver. Very nice condition, just a few nicks in the paint along the top. Cleaned inside & out, thoroughly tested. Sounds great! Specifications: Power output: 60 watts per channel into 8? (3 channels)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.05%Input sensitivity: 0.625VSignal to noise ratio: 100dBSpeaker load impedance: 2.7? (minimum)Dimensions: 16.75 x 3.5 x 12.5 inches Package Includes: 1 Three Zone stereo amplifier Please read all of the information in this listing carefully before purchasing! Returns are a major hassle for everyone. If you have any questions, please ask, Im happy to help in any way I can. If you have a problem with your order, please do not immediately report to eBay, but CONTACT ME FIRST! My top priority is the satisfaction of my customers! Ratings are important to everyone on eBay, and I try my best to keep a good rating by serving you well. Ive been installing and testing AV gear for 17 years. Im always honest & as accurate as possible in my description of the items, but A) Im only human & B) I usually only sell used gear. Some of the gear I sell is very old or even non-functional. But theres a lot of people out there who buy those items. Please inspect the photos carefully and ask any questions you may have. Thanks! :) Prep Every item is tested for proper functionality immediately before being packed. Some items are partially tested, others fully, the listing will give details. All items are thoroughly cleaned inside (when possible) and out. If appropriate, the item will be sanitized & sealed for your safety. The items are carefully packed for transit! Please be careful not to drop a heavy item while unboxing. Shipping FedEx Ground is our standard shipping option. Weve had a great experience with FedEx and plan to continue using their service. Should you have a specific need for something else, please contact us before purchasing. The items are sent out as quickly as possible! Contact If you have any questions about an item or problems with your order, please reach out! And we also love to hear that youre enjoying the product as well! Read our Seller feedback!

Sonance Sonamp 260x3 Stereo 120W Power Amp The Sonamp 260x3 is a high-cur-rent, 60-watt-per-channel stereo amplifier with a number of features that make it well suited for custom installations. It is designed to drive difficult loads, particularly the low impedances presented by multiple parallel-connected remote speakers. For convenience in operating multizone systems, the 260x3 has pushbuttons on its front panel for individual activation of its three pairs of speaker outputs. And the stereo line-input jacks on the rear apron are paralleled with a second pair for linking (“daisy-chaining”) additional amplifiers. The Sonamp 260x3 is designed to drive 2-ohm loads without overheating or distortion (three paralleled 8-ohm speakers represent a load of 2.7 ohms). Its discrete output transistors are mounted on heat sinks, convection-cooled by air entering holes in the bottom plate and exiting through holes in the top cover. The power supply uses a heavy toroidal transformer with 30,000 microfarads (?F) of filter capacitance. Several protection circuits and a relay safeguard the amplifier against overload, overheating, or output short circuits. The AC-line fuse on the rear apron is readily accessible to the user. The Sonamp 260x3, finished in black, measures a compact 16-3/4 inches wide, 12-1/2 inches deep, and 3-1/2 inches high. It weighs about 16-3/4 pounds. In addition to the pushbutton power switch, the front panel has three speaker-selector buttons, two status-indicator lights, and individual channel-level controls that can be adjusted with a screwdriver through small holes in the panel. The red power LED (marked A.C. ON) shows that the amplifier is plugged into a live outlet but not necessarily that it is turned on. The green LED (marked ACTIVE) indicates that the amplifier is switched on and operating. A somewhat unusual (and useful) feature of the 260x3 is its Auto-On mode. If the small auto-on slide switch on the rear apron is set to on and the red power lamp is lit, the amplifier will turn on automatically within 1.5 seconds after a signal reaches its input connectors, lighting the green LED. About 2 minutes after all input signals are removed, the amplifier automatically shuts down and returns to its stand-by mode. The Auto-On feature is particularly useful in multiroom installations, in which an amplifier may be located at some distance from the control center and signal source, since it eliminates the need for a remote power-switching system. But it is also handy in a singleroom installation, especially when the control unit doesn’t have enough switched outlets to handle the rest of the system. The Sonamp 260x3 is rated for outputs of 60, 100, and 125 watts per channel into 8, 4, and 2 ohms, respectively, from 20 to 20,000 Hz at respective distortion levels of 0.05, 0.1, and 0.2 percent. The respective dynamic powers into those impedances are given as 85, 120, and 140 watts per channel. A-weighted signal-to-noise ratio (S/N) is 100 dB referred to rated output. Input sensitivity for rated output is 0.625 volt at maximum gain. Prior owner was a meticulous hi fi enthusiast

Sonance Sonamp 260 Channel Power Amplifier. Used working and tested. Minor scuffs.

Sonance Sonamp 260 Stereo Audio Power Amplifier. Working as intended. Has a few minor scratches on case Please check out our eBay store. We have over 1000+ listing and are adding more daily! Sold as is. Everything you see in the pictures is what is included in this lot. Photos are the best description. Please look at ALL pictures closely before purchasing. We will document any damage the best we can but the photos will always be the best way to exam the item. Items may need a more in depth cleaning. We will do our best to clean every item, although sometimes we can’t do a full thorough clean. Message us for additional photos or questions. We are a large store please allow up to 3 business days for your item to go out. We of course will get them out as fast as we can. If you ever have a concern, PLEASE MESSAGE US before leaving negative feedback. We will help resolve whatever issue you are having. We try very hard to provide good communication and always strive for everyone to have a positive experience. We are more than happy to assist with any and all requests. Thank you for stopping by!!

SONANCE SONAMP 260 2 CHANNEL STEREO AMPLIFIER W/ POWERCORD Rack Mount Untested. It has power untested past that point Please check out our eBay store. We have over 1000+ listing and are adding more daily! Sold as is. Everything you see in the pictures is what is included in this lot. Photos are the best description. Please look at ALL pictures closely before purchasing. We will document any damage the best we can but the photos will always be the best way to exam the item. Items may need a more in depth cleaning. We will do our best to clean every item, although sometimes we can’t do a full thorough clean. Message us for additional photos or questions. We are a large store please allow up to 3 business days for your item to go out. We of course will get them out as fast as we can. If you ever have a concern, PLEASE MESSAGE US before leaving negative feedback. We will help resolve whatever issue you are having. We try very hard to provide good communication and always strive for everyone to have a positive experience. We are more than happy to assist with any and all requests. Thank you for stopping by!!

Sonance Sonamp 260x3 Stereo 120W Power Amp The Sonamp 260x3 is a high-cur-rent, 60-watt-per-channel stereo amplifier with a number of features that make it well suited for custom installations. It is designed to drive difficult loads, particularly the low impedances presented by multiple parallel-connected remote speakers. For convenience in operating multizone systems, the 260x3 has pushbuttons on its front panel for individual activation of its three pairs of speaker outputs. And the stereo line-input jacks on the rear apron are paralleled with a second pair for linking (“daisy-chaining”) additional amplifiers. The Sonamp 260x3 is designed to drive 2-ohm loads without overheating or distortion (three paralleled 8-ohm speakers represent a load of 2.7 ohms). Its discrete output transistors are mounted on heat sinks, convection-cooled by air entering holes in the bottom plate and exiting through holes in the top cover. The power supply uses a heavy toroidal transformer with 30,000 microfarads (?F) of filter capacitance. Several protection circuits and a relay safeguard the amplifier against overload, overheating, or output short circuits. The AC-line fuse on the rear apron is readily accessible to the user. The Sonamp 260x3, finished in black, measures a compact 16-3/4 inches wide, 12-1/2 inches deep, and 3-1/2 inches high. It weighs about 16-3/4 pounds. In addition to the pushbutton power switch, the front panel has three speaker-selector buttons, two status-indicator lights, and individual channel-level controls that can be adjusted with a screwdriver through small holes in the panel. The red power LED (marked A.C. ON) shows that the amplifier is plugged into a live outlet but not necessarily that it is turned on. The green LED (marked ACTIVE) indicates that the amplifier is switched on and operating. A somewhat unusual (and useful) feature of the 260x3 is its Auto-On mode. If the small auto-on slide switch on the rear apron is set to on and the red power lamp is lit, the amplifier will turn on automatically within 1.5 seconds after a signal reaches its input connectors, lighting the green LED. About 2 minutes after all input signals are removed, the amplifier automatically shuts down and returns to its stand-by mode. The Auto-On feature is particularly useful in multiroom installations, in which an amplifier may be located at some distance from the control center and signal source, since it eliminates the need for a remote power-switching system. But it is also handy in a singleroom installation, especially when the control unit doesn’t have enough switched outlets to handle the rest of the system. The Sonamp 260x3 is rated for outputs of 60, 100, and 125 watts per channel into 8, 4, and 2 ohms, respectively, from 20 to 20,000 Hz at respective distortion levels of 0.05, 0.1, and 0.2 percent. The respective dynamic powers into those impedances are given as 85, 120, and 140 watts per channel. A-weighted signal-to-noise ratio (S/N) is 100 dB referred to rated output. Input sensitivity for rated output is 0.625 volt at maximum gain. Prior owner was a meticulous hi fi enthusiast

Sonance 2 Channel AmplifierUNIT ONLY, NO any other accessories included

Please see photos for contents and condition. Fully Functional.

Sonance Sonamp 260 Stereo Clean Power Amplifier - Tested and Working!!. Good shape and works as it should Look at photos for condition Any questions please ask Check out my store for similar items RACK 3 level 3

Sonance Sonamp 260x3 - Three Zone Power Amplifier Tested Powers On.

Sonance Sonamp 260 MKii Power Amplifier Amp 2 Channel 625W Black Tested - Good overall condition, tested and working, scratches on top, dent on back corner, please see photos.- Sold as shown in pictures.- Fast shipping from the USA!- Dont miss out on these deals!

625 Watt Sonance Sonamp 260 X 3 MKII Three Zone Stereo Power Amplifier. Really nice piece here power zone works very clean. This came from an estate of a professional DJ in the late 60s and 70s. I have a lot from his collection of all these styles of equipment check out my other auctions

Sonance 2 Channel AmplifierUNIT ONLY, NO any other accessories included

Please see photos for contents and condition. Fully Functional.

Sonance Sonamp 260x3 Stereo 120W Power Amp The Sonamp 260x3 is a high-cur-rent, 60-watt-per-channel stereo amplifier with a number of features that make it well suited for custom installations. It is designed to drive difficult loads, particularly the low impedances presented by multiple parallel-connected remote speakers. For convenience in operating multizone systems, the 260x3 has pushbuttons on its front panel for individual activation of its three pairs of speaker outputs. And the stereo line-input jacks on the rear apron are paralleled with a second pair for linking (“daisy-chaining”) additional amplifiers. The Sonamp 260x3 is designed to drive 2-ohm loads without overheating or distortion (three paralleled 8-ohm speakers represent a load of 2.7 ohms). Its discrete output transistors are mounted on heat sinks, convection-cooled by air entering holes in the bottom plate and exiting through holes in the top cover. The power supply uses a heavy toroidal transformer with 30,000 microfarads (?F) of filter capacitance. Several protection circuits and a relay safeguard the amplifier against overload, overheating, or output short circuits. The AC-line fuse on the rear apron is readily accessible to the user. The Sonamp 260x3, finished in black, measures a compact 16-3/4 inches wide, 12-1/2 inches deep, and 3-1/2 inches high. It weighs about 16-3/4 pounds. In addition to the pushbutton power switch, the front panel has three speaker-selector buttons, two status-indicator lights, and individual channel-level controls that can be adjusted with a screwdriver through small holes in the panel. The red power LED (marked A.C. ON) shows that the amplifier is plugged into a live outlet but not necessarily that it is turned on. The green LED (marked ACTIVE) indicates that the amplifier is switched on and operating. A somewhat unusual (and useful) feature of the 260x3 is its Auto-On mode. If the small auto-on slide switch on the rear apron is set to on and the red power lamp is lit, the amplifier will turn on automatically within 1.5 seconds after a signal reaches its input connectors, lighting the green LED. About 2 minutes after all input signals are removed, the amplifier automatically shuts down and returns to its stand-by mode. The Auto-On feature is particularly useful in multiroom installations, in which an amplifier may be located at some distance from the control center and signal source, since it eliminates the need for a remote power-switching system. But it is also handy in a singleroom installation, especially when the control unit doesn’t have enough switched outlets to handle the rest of the system. The Sonamp 260x3 is rated for outputs of 60, 100, and 125 watts per channel into 8, 4, and 2 ohms, respectively, from 20 to 20,000 Hz at respective distortion levels of 0.05, 0.1, and 0.2 percent. The respective dynamic powers into those impedances are given as 85, 120, and 140 watts per channel. A-weighted signal-to-noise ratio (S/N) is 100 dB referred to rated output. Input sensitivity for rated output is 0.625 volt at maximum gain. Prior owner was a meticulous hi fi enthusiast

Sonance Sonamp 260 Stereo 2 CH 120W Power Amplifier-Parts Only My Dad had this Sonance Sonamp 260 Power Amplifier in his home theater before he replaced everything. I thought it was working, but when I plugged it in to test the power, I could not get the AC Power light to come on so I am not sure if its working or not.Please keep in mind this listing is for the item As-Is and there are no returns. If you know these products I am sure you could get this working again but thats beyond my skill set so I am listing it here as I have no idea if it still works or not!

Sonance Sonamp 260 MKII 2 Channel Power Amplifier.

Item Condition: Very good Shipping Options: USPS Further information: An awesome sounding little power amp capable of driving low impedence speakers. This thing has embarrassed much more expensive amplifiers I've owned and is surprisingly well built with a large torroidal transformer, chunky heatsinks and well laid out board. I believe the Sonamp 260 was originally designed with multi-room installations in mind and has an auto-on function (can be disabled). When an input signal is detected a relay clicks turn on the amplification circuits. I was using it for a little while connected to a DJ mixer for bedroom playback but it deserves much better than that and it's currently on the sidelines - time to move it on, a little regretfully. Unit works perfectly and is in very nice cosmetic condition. Specifications: Power output: 60 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.05% Input sensitivity: 0.625V Speaker load impedance: 2.7? (minimum)